Jump to content
SAU Community

1J And 2J Engine Flaws


Recommended Posts

As for the 26 head on a 30.....well that makes you sound rather daft.

RB26 head has 2 cams, 4 valves/cylinder solid lifters etc compared to the RB30 head which is SOHC 2 valve and hydraulic lifters

Link to comment
Share on other sites

WTF calm down!

He said that an RB26 is 400cc smaller than a 2J

Also fow do you have no problems flowing over 1000hp when you havent made 1000hp yet?

A car that makes 510 kw at the wheels thats almost 700hp. Can you convert that to FLYWHEEL ENGINE POWER. Its very close to a 1000 because its going through a automatic tranmission you will need to add about 20% on that drivetrain loss so as you can seethe head is more than capable of FLOWING over a 1000hp. Dont confuse that with rear wheel horspower.

Also as far as me being DAFT i know the RB30 is a single cam head. I just used it as an example as to why people use hybrids.

And saying a head has CC ratings is stupid.

Edited by Adelaideprosound
Link to comment
Share on other sites

For those who claim a j engine sounds better than an RB, clean ya farken ears out. The j can scream but it cant snarl like an angry rb.

They are both amazing engines and can punch well above their weight. 1000 plus hp is achievable in either camp.

Yes the toyota can be made to handle, there are some fine examples of quick track cars around but you have to throw a shitload more coin at them to achieve it.

Drive what you like, they both outdo the local product by a wide margin but someone should have drowned the tool that designed the supra body.

Link to comment
Share on other sites

A car that makes 510 kw at the wheels thats almost 700hp. Can you convert that to FLYWHEEL ENGINE POWER. Its very close to a 1000 because its going through a automatic tranmission you will need to add about 20% on that drivetrain loss so as you can seethe head is more than capable of FLOWING over a 1000hp. Dont confuse that with rear wheel horspower.

Also as far as me being DAFT i know the RB30 is a single cam head. I just used it as an example as to why people use hybrids.

And saying a head has CC ratings is stupid.

You said sequential gearbox for starters...but ill leave it there.

yeah yup...a head sure does have cc ratings....

Noel - you are old and your ears cant handle the 1jz scream :P

also the body is fine...the dash is gross...but Id live with it

Link to comment
Share on other sites

You said sequential gearbox for starters...but ill leave it there.

yeah yup...a head sure does have cc ratings....

Noel - you are old and your ears cant handle the 1jz scream :P

You may be right Zeb, Even screamer pipes sound like a busted arse to me. The anger of a hot rb on the other hand gives me wood. (or as close as you can get to it at my age)

Link to comment
Share on other sites

You said sequential gearbox for starters...but ill leave it there.

yeah yup...a head sure does have cc ratings....

Noel - you are old and your ears cant handle the 1jz scream :P

also the body is fine...the dash is gross...but Id live with it

You obviously dont know my car. If u think im lying head over to The Supraforums and check out the build page.

It has a fully built TOYOTA AUTOMATIC TRANSMISSION built by MV automatics, with a spragless stage 3 kit new gears, b&m quick shifter and full manual valve body so it shifts sequentially.

But its still an auto box.

Link to comment
Share on other sites

The combustion chamber is measured in CC's....thats part of the head and can play a big role in how an engine performs.

Also port volumes are measured in CC's

Manual Valve bodies in an Auto does not make it a sequential box...its an Auto with a manual valve body :)

Anyway this isnt a thread about A340's so STFU now kthx

Link to comment
Share on other sites

atleast the rb has a iron front pully not the craptastic alloy one that is a service item at 100k... all gthe 'warmed over" 2jz ive worked on have them cracked. but the kunt things never seem to mind....

Link to comment
Share on other sites

Your talking about the Harmonic Balancer El Daveo?

I must check mine...got a bit of a vibration at idle and I dont know if the exhaust vibrating or the balancer.

Link to comment
Share on other sites

The combustion chamber is measured in CC's....thats part of the head and can play a big role in how an engine performs.

Also port volumes are measured in CC's

Manual Valve bodies in an Auto does not make it a sequential box...its an Auto with a manual valve body :)

Anyway this isnt a thread about A340's so STFU now kthx

The combustion chamber is measured in cc's is it :), Dude u have lost the plot. Anyway, you made it about A340's not me, so as far me shutting up make me. I dare u to try it.

And its not just a manual valve body its a whole gearset.

Edited by Adelaideprosound
Link to comment
Share on other sites

My god.

No wonder I rarely venture to this part of the forum.

I live an breathe engines...so you go ahead and keep being incorrect and pulling your dick over your "sequential auto box" and I'll go on my merry way.

Link to comment
Share on other sites

The combustion chamber is measured in cc's is it :), Dude u have lost the plot. Anyway, you made it about A340's not me, so as far me shutting up make me. I dare u to try it.

And its not just a manual valve body its a whole gearset.

autos are ghey

... combustion chamber volume IS measured in cc's

+1

Link to comment
Share on other sites

Thread delivers teh lulz. For the record most incarnations of 1.5jz come about when a 1jz powered vehicle has a 2jz bottom end bolted on to stroke it out 500cc. You'll seldom see it done the other way around, starting with a 2jz powered vehicle - only reason I can think of is that 1jz heads are probably cheaper...

Link to comment
Share on other sites

As for the 26 head on a 30.....well that makes you sound rather daft.

RB26 head has 2 cams, 4 valves/cylinder solid lifters etc compared to the RB30 head which is SOHC 2 valve and hydraulic lifters

Well you'd put the 26 head on a 30 bottom end rather than a 26 head on an 30 head. A head on a head wouldn't make much power mate. :)

  • Like 1
Link to comment
Share on other sites

The combustion chamber is measured in cc's is it :), Dude u have lost the plot. Anyway, you made it about A340's not me, so as far me shutting up make me. I dare u to try it.

And its not just a manual valve body its a whole gearset.

Alright Captain Ahab,

Before you go on, go do some reading, because obviously you don't know what your f**king talking about.

Come back, apologize to zebra, and then apologize to the world for 'trying' to race a yacht.

Back On topic.

Personally not a fan of the sound of the J engine, have heard a few nice ones though, its all swings and roundabouts.

There are one or two very nice handling Supras, but , well that's my point there are one or two LOL.

And Birds if your going to the expense and trouble of building a hybrid, you wouldn't leave a worse performing head on it.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Been poking around on the new to me car. I've determined that I have a Kakimoto exhaust from at least the downpipe back (I haven't confirmed the downpipe yet). It has a catalytic converter. Other than the company branding on the exhaust tip, I can only find one other marking. Behind the cat and under the car is a plate that has the numbers "NF307FP" and "M11111". Unfortunately, the Kakimoto website is written in Japanese and my browser won't translate it. I found that Nengun sells the brand, but my exhaust doesn't look like their current offering. They do indicate that each pipe is custom made, but I assume that's more of an inventory control thing than some sort of special, vehicle specific tuning. Anyone have a guess about what I have here? I'm getting ready to throw some dollars at tuning this car, but want to make good decisions. No reason to throw out a perfectly good exhaust system, if this thing will equal a full custom build.
    • Congrats on the progress. That's got to feel good to get the build done/mostly done. Now that you're this deep into it, I'm curious if you'd do it again versus finding a 5MT from the get go?
    • G.G.C. (Gibier German Cook) restaurant in Motomachi in Kobe: A tiny 2 floor restaurant that was founded in 1976. The original couple who owned/ran it retired and sold the business to a corporation who pretty much tried to keep it the same as it was.  Lots of lesser known (to me anyway) German beers available.  Venison with vegetables. The meat came from deer from Hokkaido. The chef told us that there's a whole industry around the use of all parts of the deer from the antlers to the hooves. Sure enough, directly accross the street from this restaurant is a shop that sells all manner of utensils, clothes and objet d'art all made from deer skin, bones and horns.... also owned by the same corporation. The venison was super tender 😋 Various decorations, a lot of which were quite old, no doubt from the original owners. A nice pilsner too which I'd never seen before.  It's well worth a visit but check the opening hours, they're closed on Wednesdays, only open 11:30am - 3pm on Mondays and Tuedays, 11:30am-3pm for lunch and 5pm-11:30pm on Thursdays, Fridays and Saturdays, and 11:30am-3pm and 5pm-9pm on Sundays. Last order is 30mins before close.
    • Yep around 2m long or thereabouts.  I made another post in the photo diaries 17 years later lol. I swear it has not been that long!
    • Full results via link below https://docs.google.com/spreadsheets/d/1inu1mRRO0WjV2-3vGYsjnmYggVOzmApWOby68GwPGcI/edit?usp=sharing  
×
×
  • Create New...