Jump to content
SAU Community

Recommended Posts

I'd like to get some bits if they are compatible.

Does anyone know if these will fit a 2007 rear wheel drive PM35?

>I can PM the VIN if required.

Edited by DrMoShen
  • Like 1

I'd like to get some bits if they are compatible.

Does anyone know if these will fit a 2007 rear wheel drive PM35?

>I can PM the VIN if required.

The rear should.....front would be more inline with a V35 me thinks!

I'd like to get some bits if they are compatible.

Does anyone know if these will fit a 2007 rear wheel drive PM35?

>I can PM the VIN if required.

PM sent

The rear should.....front would be more inline with a V35 me thinks!

+1 for rear; it will fit. I know PN-Mad's front was identical to the NM35, but I'd be guessing your front is likely to be closer to a 350z bar. Sway bar - 32mm heavy duty blade adjustable; BNF33Z

Having said that, back to back, the 350z is the same width, and only differs due to the room required to clear the sump/front diff on awd versions.

Edited by Daleo

Hi Dale

how are the numbers stacking up? Do you have enough interest in the GB?

(This is a bump I suppose).

Just sent you a PM.

Numbers are good mate,:banana: 15 parties telling me they're in, 3 confirmed payments.

The Group Buy will be closing once I have 10 cleared payments, because the first shipment of bars is 10 sets.

There will be further Group Buys as long as there is interest, but the 2nd Group buy will have to wait until the second shipment arrives.

Not cracking the whip, but if people wait, you may miss the first run.

Thanks for your support guys.:thumbsup:

The Group Buy will be closing once I have 10 cleared payments,

I'm glad you told me that. I'll get the money to you sooner now.

Does anyone have experience of these or simmilar on rough potholed tar roads? I have an ARX with stock suspension (70k on it) and rubbish potholed roads where I live. Will these sway bar have an impact on the ability of the suspension to deal with sharp bumps and potholes?

:thanks:

Does anyone have experience of these or similar on rough potholed tar roads? I have an ARX with stock suspension (70k on it) and rubbish potholed roads where I live. Will these sway bar have an impact on the ability of the suspension to deal with sharp bumps and potholes?

:thanks:

I put my sway bars on my ARX before I replaced the suspension and the result was a car that was far firmer in suspension than the horrible worn out wallowing ones I had on. It was now more comfortable making the shock maybe 10% stiffer. I don't think you will be disappointing with the improvement.

Cheers

Andy

Does anyone have experience of these or simmilar on rough potholed tar roads? I have an ARX with stock suspension (70k on it) and rubbish potholed roads where I live. Will these sway bar have an impact on the ability of the suspension to deal with sharp bumps and potholes?

:thanks:

Absolutely, my local roads are far from billiard table smooth. You will notice some increase in harshness over potholed surfaces.

Uprating swaybars has a side effect of increasing the overall effective spring rate over SINGLE wheel bumps and potholes. This is because the heavier swaybar resists the force applied the single wheel by the surface change, due to its greater stiffness.

Over bumps and joins that effect BOTH wheels, the swaybar is moving in unison with the front wheels equally, and has no aparrent effect. This is due to the fact that both wheels are doing the same thing at the same time.

One interesting effect I have noticed with heavier swaybars, is the resistance to bottoming out the suspension over single wheel bumps, which I actually consider to be a positive.

Overall; I would happily trade a small increase in harshness, for the massive increase in stability and directness that swaybars give.

Also given that the Group Buy sway bars are adjustable, you have the opportunity to tune the exact amount of response and directness, versus harshness that suit your individual preference and your driving style.

Hope this answers your questions.

Cheers, Dale.

why a max limit of 10 ?

Principally, because the first shipment is 10 sets of bars. I won't promise something I cannot deliver in a fair time period. There will be a second shipment shortly after this one, so it will not be a long wait. I will continue while ever there is demand; I don't want anyone to miss out.

The second reason is one of simple logistics; Anything larger than this can become a bit unwieldy. To be honest; the demand for these bars has been amazing. Just to give you an idea; I've received roughly 40 PM's regarding this group buy already, most of which have required research and detailed responses. I want to be able to deliver these kits with the minimum delay and no mistakes. That way no-one is kept waiting when they've paid a considerable amount of money.

I'll be keeping the thread updated as the orders fill, that way everyone knows where we are at. Currently I have 3 cleared payments and one that will clear today most likely.

I hope you understand that my priority is providing the best possible service in the quickest timeframe, anything else just wouldn't be fair.

In your particular situation, I'm having trouble finding a freight method that will deliver to NZ for less than $200. If anyone can suggest something more affordable; please PM me.

Cheers, Dale.

Absolutely, my local roads are far from billiard table smooth. You will notice some increase in harshness over potholed surfaces.

Uprating swaybars has a side effect of increasing the overall effective spring rate over SINGLE wheel bumps and potholes. This is because the heavier swaybar resists the force applied the single wheel by the surface change, due to its greater stiffness.

Over bumps and joins that effect BOTH wheels, the swaybar is moving in unison with the front wheels equally, and has no aparrent effect. This is due to the fact that both wheels are doing the same thing at the same time.

One interesting effect I have noticed with heavier swaybars, is the resistance to bottoming out the suspension over single wheel bumps, which I actually consider to be a positive.

Overall; I would happily trade a small increase in harshness, for the massive increase in stability and directness that swaybars give.

Also given that the Group Buy sway bars are adjustable, you have the opportunity to tune the exact amount of response and directness, versus harshness that suit your individual preference and your driving style.

Hope this answers your questions.

Cheers, Dale.

Principally, because the first shipment is 10 sets of bars. I won't promise something I cannot deliver in a fair time period. There will be a second shipment shortly after this one, so it will not be a long wait. I will continue while ever there is demand; I don't want anyone to miss out.

The second reason is one of simple logistics; Anything larger than this can become a bit unwieldy. To be honest; the demand for these bars has been amazing. Just to give you an idea; I've received roughly 40 PM's regarding this group buy already, most of which have required research and detailed responses. I want to be able to deliver these kits with the minimum delay and no mistakes. That way no-one is kept waiting when they've paid a considerable amount of money.

I'll be keeping the thread updated as the orders fill, that way everyone knows where we are at. Currently I have 3 cleared payments and one that will clear today most likely.

I hope you understand that my priority is providing the best possible service in the quickest timeframe, anything else just wouldn't be fair.

In your particular situation, I'm having trouble finding a freight method that will deliver to NZ for less than $200. If anyone can suggest something more affordable; please PM me.

Cheers, Dale.

well keep me posted and ill see if i can sort anything on this side but still keen on the whole set

Update!

I've been in contact with my supplier, he has confirmed the bars are roughly 2-3 weeks away!:banana: We are now 2 weeks from the closure of the Group Buy.

I currently have 6 complete kit payments, and numerous payments for link and mount sets.

I have almost finished the first 10 sets of Heavy Duty Stainless mounts. I should have several sets to show at the Sydney meet up this weekend.

Again, to those who've paid already; thanks for your support! To everyone else; looking forward to hearing from you.

Cheers, Dale.

Here are some pics of the Heavy Duty mounts for the Sway Bars; 5mm extruded 316 Stainless Steel; won't rust, bend or fracture.thumbsup.gif

post-61153-0-82860600-1301888445_thumb.jpg post-61153-0-25156200-1301888484_thumb.jpg post-61153-0-32777900-1301888528_thumb.jpg

Or you could just use these...whistling.gif

post-61153-0-88487600-1301888745_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...