Jump to content
SAU Community

My Custom Boot Install In R32 Gtr

Travis32

By Travis32,
in Car Audio & Electrical

 Share

Recommended Posts

Carbon 34 Grand Master

Carbon 34

Posted
Posted

I see some issues in the audio side but won't bother to comment ,

except safety issues - in the fuel system you should have used a right angle fitting on the top of the surge tank , right now all the weight of the stainless hose is put into a alloy fitting welded on. just waiting to crack and spill fuel, and a few other spots that could be secured better in the fuel system, better strain relief from vibration and vent line to fresh air in case of a leak. a single drip, can stink the car up bad

a high pressure fuel fire is not a good thing

but improvement over last attempt.

  • 2 weeks later...
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

hey everyone this is my boot install in my r32 gtr keep in mind that i am not a professional in this field but done it all myself lol hope ya's like

better than the last attempt. fuel system needs attention though. I can see those lines causing cracks on that tank due to stress loading over time. I would have put a right angle fitting there myself.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Kinkstaah · Posted

      Hey, it's me! Though honestly, if I had 20M in my bank account tomorrow, I would not want to be rid of my car all of the sudden - Which makes me think this is money stuff, not "I actually hate car" stuff. I'd probably double down and buy even more trinkets and fun things for it. If this is not you, then sell it cheaper. It will sell at a certain price after all.
    • Kinkstaah
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Kinkstaah · Posted

      Of course it would be - But you shouldn't be here.
    • GTSBoy
      Hiya!

      By GTSBoy · Posted

      This is the LCA mount reloctaion kit. Self explanatory in its description. https://au.gktech.com/products/s13-180sx-r32-subframe-anti-squat-reduction-weld-in-kit?_pos=62&_fid=1e812d392&_ss=c These are the alloy subframe bush inserts that I am using. I like them. https://au.gktech.com/products/rear-subframe-slip-in-collars?_pos=29&_fid=1e812d392&_ss=c Alternatively, if you have original and shitty bushes, you might consider outright replacement with poly. https://au.gktech.com/products/polyurethane-rear-subframe-bushes?_pos=28&_fid=1e812d392&_ss=c I would also higly recommend that you look into adjustable RUCAs and tension rods, so you can sort out the camber and bump steer behaviour, especially if the car will be any more than ~15mm lower than stock. I would also highly recommend the GKTech FUCAs, although you really should do some research and learning on the subjetc of R32 FUCAs before making any decisions. All of this will be criticaly difficult to get through a TÜV inspection too, if that happens to be relevant to you. Note that if you do install the relocation kit, you will absolutely have to replace the associated bushes with spherical joints (you can read all about that on the product page) or upgrade the LCAs also.
    • Milkmun
      Does the r33 have a cabin filter?

      By Milkmun · Posted

      None on 33s.
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      I picked up my block and head last week and have been slowly assembling it since then. Pictures I took earlier this week. The rest of the auxiliaries are on now. I just have my intake manifold runners to tap for my WMI direct port setup before putting it back on. I should hopefully have the motor back in by this weekend.   
×
×
  • Create New...