Jump to content
SAU Community

Recommended Posts

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Problem is the Varex is SO restrictive when closed, it's worse than the stock exhaust.

So you end up driving around with it open because it makes the car "that bad" to drive.

Point taken. I still like the idea of leaving to work at 5am quietly. Also, going past cops quietly, Able to have a conversation with misses while going out for a coffee and so on. So yes, they are illegal, i did mention it, but to me its worth it. Dont forget i drive a 4 cylinder so my exhaust is louder. but each to their own on that one. Its an option.

It's not that bad to drive when closed...just stay off boost (though a few psi doesn't kill it), which I do throughout most daily driving anyway. Agree with Adis...early morning / late night startups alone are worth it - I'm 100db when open.

And according to those that have had one the cared mufflers sound awful. Mine is a lot quieter than most...and why... Because it's a kakimoto, which all have sound restrictors in the muffler lol :) my 2c... If ur not pulling big power, like I'm not... A kakimoto is the way forward. :)

Problem is the Varex is SO restrictive when closed, it's worse than the stock exhaust.

So you end up driving around with it open because it makes the car "that bad" to drive.

And it makes it sound like arse.

Edited by llama_au

I got quoted $1200-1300 for mine. Full custom legal 3" exhaust. Only marginally more expensive than an off the shelf item really.

Visit racepace and you will get an awesome flowing exhaust and quiet. That's how much they want :s

People compliment the sound from my twin tip Varex all the time...Hamish will tell you it's not that bad. And it can't sound worse than the rest of your system is responsible for, given the twin tip is basically a straight pipe when open...

Enough Varex hate!

Problem is the Varex is SO restrictive when closed, it's worse than the stock exhaust.

So you end up driving around with it open because it makes the car "that bad" to drive.

as in enough to cause problems or??

was thinking of doing it..not a muffler, just the flange valve, like the apexi ones.

If you run around with an exhaust that is closed like that - it's more restrictive than the factory exhaust in essence.

If you are running then a modified setup, more power and so on... You are creating ridiculous backpressure and that can actually damage the motor and is not healthy at all.

I mean it's "that" restrictive you struggle to even put the foot down and generate boost but if you try - it's not a good thing. I'd prefer not having to remember to flick a button before putting the pedal down.

And plus - by the time you've seen the Police officer to close it, it's already too late in most instances as they'll hear you coming long before you'll see them.

If you run around with an exhaust that is closed like that - it's more restrictive than the factory exhaust in essence.

If you are running then a modified setup, more power and so on... You are creating ridiculous backpressure and that can actually damage the motor and is not healthy at all.

I mean it's "that" restrictive you struggle to even put the foot down and generate boost but if you try - it's not a good thing. I'd prefer not having to remember to flick a button before putting the pedal down.

And plus - by the time you've seen the Police officer to close it, it's already too late in most instances as they'll hear you coming long before you'll see them.

ah ok.

agree with your last line..

It's not dichotomous like that. You can have it half open, a third, a quarter...find the balance between flow and volume if you like. Whatever you think Varex can't do for you, you're losing nothing by having it there. Illegal it may be, it no longer matters these days...you can get an EPA notice for a standard exhaust, without a cop even hearing it, as we've seen. But atleast I can have a sporty note and can maintain a level of respect for my neighbours during sleeping hours, or give my passengers (and myself) a pleasant road trip on the highway when the constant drone of a loud exhaust isn't appropriate. Keep an eye 200 metres behind and in front, and you'll have plenty of time for the 3 seconds it takes to shut the valve. Anyway, I'll stop selling it to you...in a way, the less of you that have one, the less aware of them the police are = the better it is for people like me!!!

my exhaust is pretty quiet.. even on full throttle.. but i just wanted something that would be dead quiet..

only reason is I like to start my car about 10 minutes before i jump in it in the morning..

when the car cold starts its really loud ,... it has that drone.

i leave for work by 5:30am.. neighbours havnt said anything but(I have nice neighbours) thats the only reason i want it..

There is no point to doing that. 30 sec, start and off you go once oil pressure and so on has settled.

Best way to warm the car up, I rarely let mine idle for longer than 2-3 mins.

Or if you really must - go drive down the street and let it sit there out the front of someone elses :P

I thought your better off granny-ing the car for a couple of k's in the morning than letting the car idle to warm it up?

Coz when you let it idle, the only thing will be warmed up is your engine, but everything else is still cold?

stock engine's are actually designed to be warmed up for 30 sec max and then driven.

excess idleing is not good for the engine and does not warm up your gearbox or diff oil anyway

Whenever i drive in the morning (learners).

Turn on car. Put up plates. (prob 1 min or so)

Drive off keeping rpm low/babying it until i get onto the main roads. Its usually fully warm by the time i reach the main road. (2 mins)

oh really? didnt know that, i thought i was just under the impression that your meant to let it warm up for 10 min.. i mean all the adds say it.

If you have a carbie car you should, for atmo injected definately not, for turbo as above, no boosting before she warms up, ask most mechanics and they will tell you that the 10min rule is a waste of fuel, and with fuel quickly heading towards $2p/ltr thats a lot of wasted money!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...