Jump to content
SAU Community

Injectors Cleaned And Flow Tested

T.D

By T.D,
in Victoria

 Share

Recommended Posts

T.D Experienced

T.D

Posted
Posted

Hey, I'm looking into getting my injectors cleaned and flow-tested within the next couple of days and was wondering if anyone could reccommend a place for me?

From searching, I've come across the following which have been suggested:

- Petroject

- AzNew Injectors

- Pro Flow

- CREATD

- Sabbadin

Any others I should add o the list to call up tomorrow for pricing?

Speaking of pricing, I called a place today regarding getting them cleaned and tested and because they are side feed (as opposed to top feed), he charged $44 per injector, which doesn't include new O-rings or anything. Is this pricing structure for side-fed injector cleaning the norm or is the guy taking me for a ride?

Also, anyone know how much a couple of O-rings for S15 injectors are?

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/359713-injectors-cleaned-and-flow-tested/
Share on other sites
T.D Experienced

T.D

Posted
  • Author
Posted
i got quoted around $20 per injector for s15 injectors (in Syd). which inlcuded new o-rings and pindle caps

WTF? So that's $20 to get them clean, flow tested AND new O-Rings and pindle caps? If so, that's a bargain cos it's only $120 for a full set of 6 :thumbsup:

But I'm down in VIC so I'm hoping for someone abit more local who will do it for a reasonable price.

Thanks anyway bud :)

ARTZ Grand Master

ARTZ

Posted
Posted

and just ask for a flow test anyway, they mat not need cleaning,but if you ask for both you will probably get charged for both. A flow test is cheap like about 10$ each

I got mine tested and only one actually needed cleaning..All up cost about 90$

T.D Experienced

T.D

Posted
  • Author
Posted
You'll find some places outsource - Just go straight to Petroject.

It'll be around $150 IIRC.

Petroject, now "Logicar"...charged about $35-40ea for 4x side feeds when I got them done...

Cheers for that, I'll give them a call now and confirm pricing :)

and just ask for a flow test anyway, they mat not need cleaning,but if you ask for both you will probably get charged for both. A flow test is cheap like about 10$ each

I got mine tested and only one actually needed cleaning..All up cost about 90$

No problems, I'll keep that in mind. Thanks bud :)

T.D Experienced

T.D

Posted
  • Author
Posted

Ok, Logicar charge $50 per injector for flow test and clean :unsure:

He wasn't offering just a flow test and said it all gets done at the same time anyway :mellow:

I also called up Injectors Online (Springvale) and the guy on the phone was really helpful and their pricing wasn't too bad either, ableit abit confusing lol

$44 per injector to get tested

$33 per injector to get it reconditioned (i.e new seals, O-rings, caps etc.)

The prices aren't compounded so IF they were tested and were fine, then it's $44 per injector. BUT if tested and require servicing, the $44 is dropped and only the $33 applies. It's a bit confusing but I'm gonna drop in and double check the figure before I leave it with them :thumbsup:

The customer service is good enough so I'll drop them off and see what's the go.

Birds Grand Master

Birds

Posted
Posted

Ok, Logicar charge $50 per injector for flow test and clean :unsure:

He wasn't offering just a flow test and said it all gets done at the same time anyway :mellow:

I also called up Injectors Online (Springvale) and the guy on the phone was really helpful and their pricing wasn't too bad either, ableit abit confusing lol

$44 per injector to get tested

$33 per injector to get it reconditioned (i.e new seals, O-rings, caps etc.)

The prices aren't compounded so IF they were tested and were fine, then it's $44 per injector. BUT if tested and require servicing, the $44 is dropped and only the $33 applies. It's a bit confusing but I'm gonna drop in and double check the figure before I leave it with them :thumbsup:

The customer service is good enough so I'll drop them off and see what's the go.

What? That's illogical. More labour = less cost? I'd believe the figures if they were swapped.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Just_a_datsun
      RB26 block, rb26 head

      By Just_a_datsun · Posted

      Block bump. $400. As above cyl 6 needs bore or sleeve.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • The Bogan
      Blue slip

      By The Bogan · Posted

      From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...