Jump to content
SAU Community

Recommended Posts

I uploaded Nissan FAST here for the Nissan SKYLINE and GTR Google + page:

https://drive.google.com/folderview?id=0BxDXWrNW4kySeW1qZVZCUFVlT3c&usp=sharing

You'll need all files and please read install Doc.

Got to step 5 and its comes up with box saying

Run-time error '339':

Component 'TabCtl32.OCX' or one of its dependencies not correctly

registered: a file is missing or invalid

Can any one help?

Thank to everyone pointing the way for basic Fast install but my s14 ADM vin is not recognised anyone have an idea of which of the other CDs I should be searching for as the drive flange I'm looking for comes in a few iterations?

BTW giong to download, just wondering which file/cd folder contains ADM data?

I uploaded Nissan FAST here for the Nissan SKYLINE and GTR Google + page:

Thanks - I've downloaded all files. After extracting the 5 part RAR file, I get iso disk images. There is a setup.exe file in each of the images, and they are all exactly the same size & a similar date / time stamp. - which one is the best to install? Are they for different markets (US & EUR) - if so what is each file? Each ISO file is quite different to the others.

Cheers

I uploaded Nissan FAST here for the Nissan SKYLINE and GTR Google + page:

 

Thanks - I've downloaded all files. After extracting the 5 part RAR file, I get iso disk images. There is a setup.exe file in each of the images, and they are all exactly the same size & a similar date / time stamp. - which one is the best to install? Are they for different markets (US & EUR) - if so what is each file? Each ISO file is quite different to the others.

 

Cheers

Any setup file should be fine. I don't remember having to setup multiple ISOs just one and used the main file to point to all the ISOs after installation.

The ISOs ARE FOR JDM vehicles including the Skylines. USA vehicles can be found on Courtesy Nissan's website (courtseyparts.com). I don't have the Eur ISOs. I apologize about that.

Any setup file should be fine. I don't remember having to setup multiple ISOs just one and used the main file to point to all the ISOs after installation.

The ISOs ARE FOR JDM vehicles including the Skylines. USA vehicles can be found on Courtesy Nissan's website (courtseyparts.com). I don't have the Eur ISOs. I apologize about that.

hi can i check...

u have the A1 etc rar files and the FAST2010disc1 etc rar files....are they the same? also when u click on info (within the program) what is the year of your databases? cheerios

slave cylinder and manual transmission illustrations come up with "illustrations cannot be found"

? :S

Do I have a strange VIN or something lol. Anyone got a 33 and been able to look at manual trans illustrations?

I was able to generate a manual transmission for a R33GTST without any issues.

I just used the search by parts function IIRC.

I would generate one for you but currently in Finland FTM so will have to wait until next year.

I uploaded Nissan FAST here for the Nissan SKYLINE and GTR Google + page:https://drive.google.com/folderview?id=0BxDXWrNW4kySeW1qZVZCUFVlT3c&usp=sharingYou'll need all files and please read install Doc.

Hi Ruben.

You back in the states mate?

When I extract the RAR file (from the 5 part fast2010disks.partx.rar files), I get 7 different .iso files, as follows:

CA1001.iso

CAINF1001.iso

ELDVD1001.iso

EURINF1001,iso

GLDVD1001.iso

USDVD1001.iso

USINF1001.iso

Each of these iso files has a \FastPRG\Win2000\Setup\setp,exe (along with heaps of other files). These iso files are totally seperate to the A1, A2, A3, B1 & B2 isos.

My question is what are all these seperate isos for, and which one is the best to install?

When I extract the RAR file (from the 5 part fast2010disks.partx.rar files), I get 7 different .iso files, as follows:

CA1001.iso

CAINF1001.iso

ELDVD1001.iso

EURINF1001,iso

GLDVD1001.iso

USDVD1001.iso

USINF1001.iso

Each of these iso files has a \FastPRG\Win2000\Setup\setp,exe (along with heaps of other files). These iso files are totally seperate to the A1, A2, A3, B1 & B2 isos.

My question is what are all these seperate isos for, and which one is the best to install?

I think all of theses iso files are for the Canadian, European and US market. You may not want any of those because they do not have JDM listings.

hi can i check...

 

u have the A1 etc rar files and the FAST2010disc1 etc rar files....are they the same? also when u click on info (within the program) what is the year of your databases? cheerios

Honestly, I haven't used the program in some time. I do not currently have it installed. However, I have installed the program a couple of times in the past.

The 2010 program should be installed first. I remember using MagicISO for that. Once the program is installed you need to configure it and make the program load the appropriate Skyline CDs. I wanna say that I used MAGICISO to create the virtual drives for that as well.

Hi Ruben.

You back in the states mate?

Hey, mate. It's been a long time. glad to see that your builds is going so well. :-)

I recently installed a BNR34 MFD into my BNR32. Otherwise, everything is slow with my build.

I'm not in the states just yet but I hope I can pay a visit to Oz really next year.

When I extract the RAR file (from the 5 part fast2010disks.partx.rar files), I get 7 different .iso files, as follows:

 

CA1001.iso

CAINF1001.iso

ELDVD1001.iso

EURINF1001,iso

GLDVD1001.iso

USDVD1001.iso

USINF1001.iso

 

Each of these iso files has a \FastPRG\Win2000\Setup\setp,exe (along with heaps of other files). These iso files are totally seperate to the A1, A2, A3, B1 & B2 isos.

 

My question is what are all these seperate isos for, and which one is the best to install?

I believe I used the US or Canadian one per my preferred flavor of the English language. :-)

I think I installed in compatibility mode too.

The ISOs with the letters in front of them are for the JDM vehicles.

I don't have much need to look up numbers lately so I haven't installed it on my current system.

I was able to generate a manual transmission for a R33GTST without any issues.

I just used the search by parts function IIRC.

I would generate one for you but currently in Finland FTM so will have to wait until next year.

I can find the parts (in desc search) but the illustration doesnt exist for whatever reason..... strange

  • 1 month later...

Here is what I did and this works in windows 64 bit systems so no messing around with virtual windows setup which is a pain in the ass.

NISSAN FAST 2010 and A1, A2, A3, B1, B2 CDs

This will install on 32-bit and 64-bit systems.

http://depositfiles.com/files/c3dqowelq

(this will be approx. 1GB in size)

Instructions

  • Open the NISSAN_FAST_2010_A1_A2_A3_B1_B2.zip file.
  • Extract/Drag the 'NISSAN' folder to your local disk (E.g. C:\ drive).
  • Navigate to 'C:\NISSAN\FASTPRG\WIN2000\SETUP' and open 'SETUP.EXE'.
  • Click 'Next' a few times and complete the setup.
  • Navigate to 'C:\NISSAN' and open 'Nfset'.
  • Select the 'CD-ROM SETUP' tab and add all CDs from 'C:\NISSAN\CD' (A1, A2, A3, B1, B2) by selecting 'Browse' for each drive number.
  • This step is not necessary. In 'Control Panel' open your 'Fonts' folder. Click on 'Font Settings' and make sure 'Hide fonts based on language settings' is unchecked. While in Nfset, click on the 'ALL' tab and select 'MS Gothic' as the font and script to Japanese
  • Now open 'Nissan Menu' from the Start menu.

Hopefully I've explained this as easy as possible and didn't miss any steps.

Cheers,

Ants

I've been trying to download this for the past couple of days but it always gets to 50mb and stops downloading, does anyone have a torrent for this one as I'm using windows 8 and this one apparently works on windows 8, or should I just bite the bullet and pay the $11 premium membership and hopefully it downloads, thanks.

I've been trying to download this for the past couple of days but it always gets to 50mb and stops downloading, does anyone have a torrent for this one as I'm using windows 8 and this one apparently works on windows 8, or should I just bite the bullet and pay the $11 premium membership and hopefully it downloads, thanks.

You tried the link I posted for the files?

I just installed this last week so I know the files work.

You'll need to download MagicDisc, at least 1 2010 file, install via the setup file (I used windows 2k setup), decompress all the letter files into sub directories of the main FAST directory (i.e. c:\fast\A2), edit the NFS.EXE file to point to the sub directories where you decompressed the files, then start the program.

  • 3 months later...

Bit of a thread bump for anyone with the same issue as me (can't see geabox illustrations)

It looks like you can either get an R33 S2 Vin and use that, or click the disc icon on the top toolbar which lets you select what model you want to look at. When you go to R33 and go to the gearbox illustrations then you will see a menu asking you to choose what model you want to look at. Just go to RB25DET.MT.F5 that is 9501 model onwards. You will get the illustrations this way

I installed Fast on my new computer last night and while having a play I worked this out

I'm not sure if the original issue I was having was to do with having a Series 1 or what, but I'm 99% sure there is no difference in the S2 box so shouldn't have a problem

Hope this helps anyone having issues

  • 1 month later...

Here is what I did and this works in windows 64 bit systems so no messing around with virtual windows setup which is a pain in the ass.

NISSAN FAST 2010 and A1, A2, A3, B1, B2 CDs

This will install on 32-bit and 64-bit systems.

http://depositfiles.com/files/c3dqowelq

(this will be approx. 1GB in size)

Instructions

  • Open the NISSAN_FAST_2010_A1_A2_A3_B1_B2.zip file.
  • Extract/Drag the 'NISSAN' folder to your local disk (E.g. C:\ drive).
  • Navigate to 'C:\NISSAN\FASTPRG\WIN2000\SETUP' and open 'SETUP.EXE'.
  • Click 'Next' a few times and complete the setup.
  • Navigate to 'C:\NISSAN' and open 'Nfset'.
  • Select the 'CD-ROM SETUP' tab and add all CDs from 'C:\NISSAN\CD' (A1, A2, A3, B1, B2) by selecting 'Browse' for each drive number.
  • This step is not necessary. In 'Control Panel' open your 'Fonts' folder. Click on 'Font Settings' and make sure 'Hide fonts based on language settings' is unchecked. While in Nfset, click on the 'ALL' tab and select 'MS Gothic' as the font and script to Japanese
  • Now open 'Nissan Menu' from the Start menu.

Hopefully I've explained this as easy as possible and didn't miss any steps.

Cheers,

Ants

Sorry to revive an old thread, but I ran into a problem with Step 7. "MS Gothic" is not an option for fonts, and no matter what I pick, Japanese is not an option for the script. Fast is working, but most of the tabs are showing in Japanese characters. Any work around for this?

Thanks!

You have to download the font, but I could only find it on the Microsoft site and it cost money so I couldnt be bothered. Unless someone has a link to a site where you can get the write font

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...