Jump to content
SAU Community

Recommended Posts

Best yes, to go to a person who knows the idiosyncracies of Skylines.

Around Sydney/N.Sydney?

1) Tune House at Marrickville

2) Powerplay Imports at Drummoyne

3) Envy Imports at Brookvale

I'm not sure who services the Skylines from Northshore Prestige

If it were me, I'd go to Tune House first.

If you don't mind travelling,

4) Unigroup Engineering at Girraween

5) Dart Engineering at Punchbowl

6) Croydon Racing Development

Best Price and Communication out of the above?

* Unigroup

* Tune House

* Dart

Link to comment
https://www.sau.com.au/forums/topic/361417-car-servicing/#findComment-5768963
Share on other sites

If by service you mean a oil change, filter,plugs, radiator flush,you should do it yourself.

Saves a lot of money so you can buy the best parts.

Hell, you could do gearbox and the diff oils as well and still be way infront.

Mark

Link to comment
https://www.sau.com.au/forums/topic/361417-car-servicing/#findComment-5769582
Share on other sites

The average of my alto has dropped to 13 kmpl...till the last month it was giving arnd 16-17 with ac on...As i am going to give the car for servicing sometime nextweek, i would like to have inputs from u all as to what things i need to check with or get replaced in order to enhance the average. bmw tail lights

Edited by Mod. Fixed the link :)

Edited by NISMO
Link to comment
https://www.sau.com.au/forums/topic/361417-car-servicing/#findComment-5770108
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...