2X044 Thru A Single Fuel Line

[ahh 33 s2]

what are your opinions on running 2x 044 thru a single fuel line, its to feed a twin entry rail and 1000cc injectors,

or is it worth running an extra line and and using the stock return line as a feed along with the standard feed line to run to both ends of the rail and the extra line as a return to the surge tank,

more then likely just be on 98 as well, but would like a system in place to handle E85 if sleepy perth ever wakes up

cheers

dan

[rob82]

what are your opinions on running 2x 044 thru a single fuel line, its to feed a twin entry rail and 1000cc injectors,

or is it worth running an extra line and and using the stock return line as a feed along with the standard feed line to run to both ends of the rail and the extra line as a return to the surge tank,

more then likely just be on 98 as well, but would like a system in place to handle E85 if sleepy perth ever wakes up

cheers

dan

No point if you concerned about fuel flow then turn the base pressure up.

[N1GTR]

Yes run the extra line.

[ahh 33 s2]

Yes run the extra line.

so the way i said it, us the two standard lines as feeds and run a -6 as a return?

[JonnoHR31]

or use a hicas line or breather line if they're no longer being used

[ahh 33 s2]

yeh i thought of the hicas lines, but have read that its very hard to flare or flare properly

[89CAL]

No HICAS Lines on a 33........

[toffy]

have you ever tried to breath through a long small straw? . By reading your post i'm assuming you don't have e85 readily available yet? why not save up while waiting and do it all properly??

[ahh 33 s2]

No I don't not at all apart from buying barrels, hence y I'm asking what the best option is,

[N1GTR]

so the way i said it, us the two standard lines as feeds and run a -6 as a return?

Id use bigger. If you don't have the ability to control pump speed don't forget the pumps will be moving a heap of fuel when the car is idle (in traffic) and it will be trying to squeeze back to the tank.

[ahh 33 s2]

3x -8???

[Ryan1200]

I made 520rwhp on a single standard line with one intank then upgraded to dual intanks and used 2 standard lines as feeds then a -6 as return seems to work ok so far..

[scotty nm35]

3 x -6 should be plenty, they are 8mm internal, bigger than the outlet from the pump. I would only go to -8 or larger for the big single pumps like the A1000.