Jump to content
SAU Community

Recommended Posts

  • 1 month later...

Not really much an update:

Bough a nismo adjustable fuel pressure reg to up the fuel pressure a little as ill probally use the stock injectors with a bigger turbo, and z32 afm. If not i might try to find some S15 injectors and use them aswell.

09012012328.jpg

Also i have put a deposit on one of these:

IMG_6119.jpg

For the people that don't know its a GTSR manifold and there was probally only 800 - 900 cars made, with maybe a few spare ones in the nissan wearhouse world wide. The guy is in no rush to sell it and hasn't advertised it anywhere i just got lucky when he pm'd me saying he had one :nyaanyaa: . Only problem is it doesn't have a heat shield but i guess i will live.

Hopefully i will have it in a couple of months as i have applyed for my old job back as a second job to bring in some more money.

How so AFAIK RB20 and RB25 exhaust gaskets are the same so wouldn't the manifold's be the same too? I know i will have to re do cooler pipes and the dump pipe but i wasn't aware of anything else, apart from moving loom, rotating the turbo etc.

  • 5 weeks later...

Got a few little more goodies over the last month.

Oil temp gauge

Bonnet pins

550cc Jecs injectors

Still saving hard for the GTSR manifold i will have it before i got to Europe. Thinking i might get the turbo i bought off my mate rebuilt and z32 afm sometime later in the year, as my job is looking promicing pay wise with alot of changes happening later on in the year. Wouldn't mind some Tomei pon cams and some other little goodies but ill have to see how we are once we move into our place.

20022012345.jpg

IMG_0667.jpg

  • 1 month later...

Got a package this morning from datberger off the r31skylineclub. Ever since i heard a GTSR i have allways wanted one of the manifolds and now i can safely say i have one! After all the time i spent looking for one he pm'd me saying he has one he might let go, so of course i couldn't pass up the offer. The turbo attached will be the turbo I'm getting high flowed and rebuilt. Couple of pics:

WP_000046.jpg

WP_000049.jpg

Apart from getting the turbo done the only other thing on my list with out it getting even more out of hand is to get the injectors cleaned and flow tested against each other!

Bigger updates to follow at the end of the year :yes: .

  • 2 weeks later...

Got one of these from work today! Put it on the old interest free account that keeps on getting higher by the month, i have also ordered the genuine mesh for the other side so it will match. Once i get my front bar off and the hole cut ill give it to my painter to match the paint too the bar and the vent will get a lick of paint!

Ill use the drivers side for the oil cooler and the passanger side for a CAI once i remake the intake pipe up when the manifold/turbo is installed.

WP_000059.jpg

Turbo was sent off to be rebuilt and highflowed on Thursday!

Injectors went down to MTQ on Friday to get cleaned and flow tested.

Front bar will be coming off this weekend and will be ready to take to the painters on Monday morning to have the vent matched.

Also looking into options for a half cage in the back. Still retaining the trims and roof lining just getting rid of the rear seats.

More info and pics to follow next week.

  • 3 weeks later...

Well i got the turbo back from hypergear! Pretty happy with it except my garrett front housing couldn't have been used but ill live.

WP_000088.jpg

WP_000090.jpg

Much larger now but i wont be able to see what it can do until roughly late next year when i have finished building her.

Im saving for a Z32 afm from Ev at Garage 7 currently aswell as a few other little goodies he's going to hook me up with soon!

Next year is the build year so im hoping i will have 99 percent of everything i want with little spending on other parts. But we all know how that will end up...

As the weeks tick down until Europe the funds dry up! Hoping everything will work out though.

  • 4 months later...

Well i haven't updated this in ages a quick run down. Im back from Europe and about to move into our place so once my shed is built its game on for the old girl. Parts i have collected over the last few months are:

Powersteering cooler with push on hose

Nardi deep corn with blue stitching. Boss kit

Bride vio fixed seat

Harness

30mm RCA

Factory Nissan vent mesh aswell as the drivers side vent. Thanks to work

Braided brake lines and clutch line

Surge tank set up

Solid steering bush

S15 adj front links, D bushs, link bushs front and rear. Rear controll arm bushs

Maybe a few other things but thats all i can think of for now. II have some Tomei pon cams and an 044 pump lined up in the next few weeks thanks to a SAU member!

I have a rather expensive list made up that has some really nice goodies that i would like to get now i have freed up some cash!!

WP_000239.jpg

Only a weekends work :whistling:

I moved the old girl into the carport of our place for the time been until the shed gets built. After not driving her for well over a year i was excited to drive her there so i borrowed the trade plate one Friday night just to make sure i would make it haha.

Apart from that i really cannot wait to get stuck in and start making it all come together!!!

Stay tuned.

Recieved all my bushes and s15 adjustable links yesterday. I can add +/- 0.25 camber and toe this shall help with my fitment as the rear tyres are scrubbing the guards, ill also be doing some light guard work to help them fit in a little better. I think the only bushes i have left to do is the rack from memory.

WP_000278.jpg

I also picked up last week some Hel braided brake lines front and rear, clutch line, 4M of push on hose for my surge tank and powersteering cooler aswell as a variety of -8N speedflow fittings for the surge setup. All thanks to Evan at G7.

WP_000267_zps4e865dfc.jpg

Thanks mate. Some big updates and progress to come in the next few months once i settle into our new place! I can't wait to get her out again and go for a squirt through the hills on a low key cruise. Keen to do some track days too with the SAU boys but only time will tell.

Aiming for AJD 2014 for the revile after been in a "build" (if you can call it a build) over the last few years!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Got you mate. Check your email!
×
×
  • Create New...