Jump to content
SAU Community

Recommended Posts

Parting out my wrecked r33 gtst (auto). It was a repairable write off due to damage to the left rear quarter. Its done 157xxxkms and currently fully functional (as of writing!), has most parts on it, though i need to remove the stock springs to get my replacement car through regency.

Couple of pics attached, can provide more if necessary.

If there's anything you need let me know. Happy to sell it as a whole or in parts

post-47247-0-90221100-1303359137_thumb.jpg

post-47247-0-37518300-1303359146_thumb.jpg

post-47247-0-17666600-1303359155_thumb.jpg

Boot trim is in good nick from memory. Dont know how postable it is, as the back panel covering the battery couldn't be folded and neither could some of the other parts which are molded.

hey mate interested in gear shifter and power window switch with plastic how much including postage to melbourne?

Edited by skysilv

$40 for drivers side switch...whoever wants it. It's in working condition, had the usual issue with r33 drivers side window, but auto elec re-soldered the switch a year or two ago which fixed it up good. Only blemish is with the passenger door lock button where the icon has faded a bit. Photo attached.

post-47247-0-25502300-1303805396_thumb.jpg

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If there's enough meat in the housing where you want to put the M12 adapter, then do it, but be aware that if/when you f**k that up you'll probably be repairing it before doing anything else. I'd just drill it out and tap ina 1/4" thread. No need for rocket surgery when the next most obvious thing will do. You could throw a 1/4 x 1/8 bush in there and use the same fitting you intended to use.
    • Is the only issue that the oil catch can is getting filled on hard runs? I'd be thinking more about oil control issues rather then the head lifting, especially as you aren't seeing spiking in the coolant pressure.  Do you need restrictors in the head, or better drains from the head? Does the sump need venting to the catch can?
    • Tried to make 1/8npt threads into compressor house of the turbo for my EBC. Threads got fu#ked and ended up with and elongated hole, so I do have good amount and nice threads 90% of the hole but 10% I only had 1-2threads there and rest of it is flush on that side of the hole.. So my idea is to do M12 x 1.25 to AN4 with braided lines instead of 1/8npt to 4mm vacuum silicone hose.  and hopefully get a better thread. M12 is quite big and AN4 is a little bit bigger than 4mm (4.9mm inner diameter braided PTFE hose). but this should work. Thoughts? Otherwise I will weld and adapter onto the turbo.   
    • Looks great, I hope everything is working well after all that time!
×
×
  • Create New...