Jump to content
SAU Community

R33 Nismo Lcd Screen Wiring Help

GTS11

By GTS11,
in Exterior & Interior Styling

 Share

Recommended Posts

GTS11 Apprentice

GTS11

Posted
Posted

Hi Guys,

Please forgive me if i have done this wrong, never posted before.

I have reciently bought a 33 with a nismo lcd dash (not connected to anything) and was wondering if someone can help me out. At the back there is a RCA plug and 2 pins under it, im guessing there for power. Does anyone know which is positive & negitive?

any help would be greatly apreciated!

post-78369-0-54976600-1303749737_thumb.jpg

post-78369-0-53963300-1303749765_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/362118-r33-nismo-lcd-screen-wiring-help/
Share on other sites
GTS11 Apprentice

GTS11

Posted
  • Author
Posted

yeah there is the ej1 and other systems,

I have a deck that plays dvd's and i was going to plug that in through the rca lead to test if the lcd screen works but i think the two pins below are for power and was just wondering if anyone knew which was neg and pos?

Skysthelimit Contributor

Skysthelimit

Posted
Posted (edited)

just to confirm for you, yes those pins are the power to the screen.

I have one of these in my car hooked up to the ej1 unit. But unfortunately off the top of my head I do not recall which of the pins is positive and negative, as mine was all ready to go with a power cable still fitted over them :P

Edited by Skysthelimit
  • 4 weeks later...
bngbng Enthusiast

bngbng

Posted
Posted

Hi i bought one of these nismo lcd cluster, but it only came with the navigation system..does the navigation work in australia and have english? also i have a motec ecu..if i cant find a epson ej1 system am i best off with the HKS CAMP or HKS CAMP2 ? please help if can

thanks

DJSimmo Community Regular

DJSimmo

Posted
Posted

Hi i bought one of these nismo lcd cluster, but it only came with the navigation system..does the navigation work in australia and have english? also i have a motec ecu..if i cant find a epson ej1 system am i best off with the HKS CAMP or HKS CAMP2 ? please help if can

thanks

i had an EJ1 its broken the display chip is faulty and the display is scrambled.

Best bet is to get the HKS Camp 2 and the Nissan Consult harness it works really well and has allot more features compared to the EJ1.

You can also buy optional sensors for the HKS Camp 2 like boost, oil pressure, exhaust temp, oil temp etc

bngbng Enthusiast

bngbng

Posted
Posted

hey ok cool thanks for the help..ill look into the camp2

i had an EJ1 its broken the display chip is faulty and the display is scrambled.

Best bet is to get the HKS Camp 2 and the Nissan Consult harness it works really well and has allot more features compared to the EJ1.

You can also buy optional sensors for the HKS Camp 2 like boost, oil pressure, exhaust temp, oil temp etc

DJSimmo Community Regular

DJSimmo

Posted
Posted

hey ive been reading throu some other post about the hks camp2..will it connect to a aftermarket ecu ?

There is a possability the HKS Camp 2 might work with an aftermarket ecu because HKS offer a CAMP 2 Universal Adaptor which has to be hard wired or soldered onto the ecu wires.

Apparently the Universal Adaptor can pick up the following...

SPEED, RPM, INJECTOR, and THROTTLE

Check out the HKS CAMP 2 FAQ's

http://www.hksusa.com/faq/?ID=3516

bngbng Enthusiast

bngbng

Posted
Posted

ok thanks again for the help will look into it more thanks

There is a possability the HKS Camp 2 might work with an aftermarket ecu because HKS offer a CAMP 2 Universal Adaptor which has to be hard wired or soldered onto the ecu wires.

Apparently the Universal Adaptor can pick up the following...

SPEED, RPM, INJECTOR, and THROTTLE

Check out the HKS CAMP 2 FAQ's

http://www.hksusa.com/faq/?ID=3516

  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • silviaz
      Returning after a long time!

      By silviaz · Posted

      That's awesome. Fully serviced/full log book history for one of those cars is super rare from what I know. With JDM's like Skyline's, Supras, are quite hard to find one with full log book history. S15's seem to be somewhat of an exception, at least the spec s australian delivered models.
    • DRoc81
      R33 GTS25 NA - Stalling when vehicle is at operating temp

      By DRoc81 · Posted

      Hey all, It's been a bit since I have been able to update.  I pulled the fuel pump, first off it was a "universal" pump and the strainer was very clogged, and it was folded over on itself.  I replaced the fuel pump and all is well....  No more stalling.
    • Roy
      Garrett G Series

      By Roy · Posted

      That's convinced me I'll bump up the G30-660 to 770   Any idea if the difference in boost pressure? Cheers
    • Keeper
      SAUNSW - GTR Festival 2025 - Saturday 24th May

      By Keeper · Posted

      When: Saturday 24th of May 2025 - All day Where: Sydney Dragway, Eastern Creek Cost: Varies - Book direct with the GTR Festival Website We will be there on the day with a stand please reach out via our interest form if you wish to help out with the stand. Limited parking will be available in the display area, first in first served with current members getting priority, please register your interest with the link above also. Please post any great photos you take on the day on this thread and we will try use some in our e-mails/website/social media
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Hey guys so turns out this project is going to be much bigger than I thought haha but I've done some my homework and have done a few panels on my car, but one part I can just not visualise is this. If I do a spot repair and I put filler in a dent for example and sand outside of the repair with 320 grit lets say so the primer can stick as I will only put primer on that repair and the surrounding area and then repaint the whole panel. Don't I need to make sure that I don't put primer on the old clear coat? I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down, it's still shiny. I thought putting paint on clearcoat or primer on clearcoat is a bad idea because it won't stick. So in this scenario it's a bit different to mine but imagine someone doing a spot repair and only painting that small section of repair but the new paint is landing on the old clearcoat. What am I missing?
×
×
  • Create New...