Jump to content
SAU Community

Recommended Posts

Hi Guys,

Please forgive me if i have done this wrong, never posted before.

I have reciently bought a 33 with a nismo lcd dash (not connected to anything) and was wondering if someone can help me out. At the back there is a RCA plug and 2 pins under it, im guessing there for power. Does anyone know which is positive & negitive?

any help would be greatly apreciated!

post-78369-0-54976600-1303749737_thumb.jpg

post-78369-0-53963300-1303749765_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/362118-r33-nismo-lcd-screen-wiring-help/
Share on other sites

yeah there is the ej1 and other systems,

I have a deck that plays dvd's and i was going to plug that in through the rca lead to test if the lcd screen works but i think the two pins below are for power and was just wondering if anyone knew which was neg and pos?

just to confirm for you, yes those pins are the power to the screen.

I have one of these in my car hooked up to the ej1 unit. But unfortunately off the top of my head I do not recall which of the pins is positive and negative, as mine was all ready to go with a power cable still fitted over them :P

Edited by Skysthelimit
  • 4 weeks later...

Hi i bought one of these nismo lcd cluster, but it only came with the navigation system..does the navigation work in australia and have english? also i have a motec ecu..if i cant find a epson ej1 system am i best off with the HKS CAMP or HKS CAMP2 ? please help if can

thanks

Hi i bought one of these nismo lcd cluster, but it only came with the navigation system..does the navigation work in australia and have english? also i have a motec ecu..if i cant find a epson ej1 system am i best off with the HKS CAMP or HKS CAMP2 ? please help if can

thanks

i had an EJ1 its broken the display chip is faulty and the display is scrambled.

Best bet is to get the HKS Camp 2 and the Nissan Consult harness it works really well and has allot more features compared to the EJ1.

You can also buy optional sensors for the HKS Camp 2 like boost, oil pressure, exhaust temp, oil temp etc

hey ok cool thanks for the help..ill look into the camp2

i had an EJ1 its broken the display chip is faulty and the display is scrambled.

Best bet is to get the HKS Camp 2 and the Nissan Consult harness it works really well and has allot more features compared to the EJ1.

You can also buy optional sensors for the HKS Camp 2 like boost, oil pressure, exhaust temp, oil temp etc

hey ive been reading throu some other post about the hks camp2..will it connect to a aftermarket ecu ?

There is a possability the HKS Camp 2 might work with an aftermarket ecu because HKS offer a CAMP 2 Universal Adaptor which has to be hard wired or soldered onto the ecu wires.

Apparently the Universal Adaptor can pick up the following...

SPEED, RPM, INJECTOR, and THROTTLE

Check out the HKS CAMP 2 FAQ's

http://www.hksusa.com/faq/?ID=3516

ok thanks again for the help will look into it more thanks

There is a possability the HKS Camp 2 might work with an aftermarket ecu because HKS offer a CAMP 2 Universal Adaptor which has to be hard wired or soldered onto the ecu wires.

Apparently the Universal Adaptor can pick up the following...

SPEED, RPM, INJECTOR, and THROTTLE

Check out the HKS CAMP 2 FAQ's

http://www.hksusa.com/faq/?ID=3516

  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...