Jump to content
SAU Community

Recommended Posts

Hi All,

Just wondering whether anyone in Melbourne/Victoria knows of someone who can tune them?

All the research I have done on these forums and on the net only points to tuners who can do them as only being available interstate (QLD, NSW).

Just trying in here for one last shot.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/363490-fcon-v-pro/
Share on other sites

i know where u can get the data cable

but u still need someone to tune it

ie sell it and buy a supported ECU is your best bet

just make sure its the plug and play model and not hardwired

if its hardwired your in for some nasties trying to remove it

Link to comment
https://www.sau.com.au/forums/topic/363490-fcon-v-pro/#findComment-5800402
Share on other sites

Yeah,

Well the bad luck for me is that mine came imported in with it installed. >_<

I actually want to have it removed and the previous owned has had it hard wired - hopefully I can find someone who can remove it.

Does anyone know of any ECU's that are EPA approved?

I might actually start another thread on that - EPA approved ECUs... Doubt such a thing exists???

Link to comment
https://www.sau.com.au/forums/topic/363490-fcon-v-pro/#findComment-5800409
Share on other sites

There is no such thing as EPA approval for ECU in Victoria. You cannot get approvals either realistically.

If the loom is too hacked up, but a new GTR loom from Nissan (~$600-700) and get a PowerFC ($900) or similar and go down that path.

At least then when you get defected, and it will happen, you can just put the stock ECU back in and away you go.

Whilst a new loom might sound expensive, if the F-Con is wired in like i think it is, it'll be easier and cheaper just to start over.

Also the fact ANYONE can then tune your car, rather than you be restricted to 1-2 people...

Link to comment
https://www.sau.com.au/forums/topic/363490-fcon-v-pro/#findComment-5800650
Share on other sites

yeah you can try the FCON, its actually a great ECU

but the problem is lack of tuners, so you might be locked into say 1 workshop in vic

so your stuck with their tune, their pricing and how it is setup etc

with a locally supported ECU you can pick your price and workshop basically

find out how much to remove it and revert to stock loom

if its mega then yeah i would stick with it and tune with cable

but if its half normal to rip the loom out and revert to std loom do that

then you cna go nistune, powerfc, vipec etc

many plugin options (and easily resellable) the FCON wont sell for much cos no one wants it

Link to comment
https://www.sau.com.au/forums/topic/363490-fcon-v-pro/#findComment-5801108
Share on other sites

Hi mate, I actually know someone who has one and it was tuned in his GTR. It was tuned by Cihan at Edge Motorworks. I take my car there as well and the results have been fantastic. www.etuner.com.au

i agree with this.

tunes my car (emanage) and has installed and tuned FCON's before. as well as installed! probably the best person for the job!

if you look at selling the F-con Pro, i might know someone interested in buying it off you. pm me.

Link to comment
https://www.sau.com.au/forums/topic/363490-fcon-v-pro/#findComment-5801558
Share on other sites

Chasers can tune it

and if you want someone to tune it i have the cable and software myself can let your tuner borrow it if he can understand basic japanese not hard for basic tunning but if you want to setup special features can take some time

Link to comment
https://www.sau.com.au/forums/topic/363490-fcon-v-pro/#findComment-5801623
Share on other sites

Seems everyone wants to buy this HKS FCon ECU off me... We'll see people! I will first give a call to all the recommended tuners above, thanks guys.

The previous owner seemed a bit of HKS lover. Along with the ECU we have found:

HKS Turbos

HKS Boost controller

HKS Dump Pipes

I guess think taking out the ECU will impact the above - in terms of power output.

Link to comment
https://www.sau.com.au/forums/topic/363490-fcon-v-pro/#findComment-5811242
Share on other sites

nope, just because those items are made by HKS, they certainly don't 'need' a HKS ecu for them to work properly... hehe, a dump pipe is just a pipe :) - boost controller (evc 5/6?) is setup on it's own anyway

changing to a good ECU's, with a good tuner, will have everything running just as well as the HKS one :) - but don't change if you've got a few options to tune - unless you can make some money selling the HKS and switching to something else :D

Link to comment
https://www.sau.com.au/forums/topic/363490-fcon-v-pro/#findComment-5811856
Share on other sites

  • 2 weeks later...

Took the advice of Shadz and AaronNM35 and took the car to Cihan at Edge Motorworks. Thanks for the recommendation guys.

Got the car dyno tested, and with a few adjustments/changes, they got the car to pull at 308 Kws at all 4 wheels! :rolleyes:

Great team at Edge Motorworks - highly recommend them.

Link to comment
https://www.sau.com.au/forums/topic/363490-fcon-v-pro/#findComment-5837650
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...