Jump to content
SAU Community

Recommended Posts

hi guys,

i was gonna install a fcd to my skyline but have been talked out of it and told to use a nistune chip and tune everything properly, as they are better for the engine and still relatively cheap. who has one of these chips?? and if anyone has any advise like wether i should try one of them or just spend the extra money and get a pfc??

would b great for a little help and cheers in advance

Link to comment
https://www.sau.com.au/forums/topic/364280-nistune-chip-or-spend-extra-for-pfc/
Share on other sites

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

www.nistune.com It would be cheaper if you ordered it and had someone you know who is good at micro soldering to install the daughterboard. Otherwise a workshop can do all the work of installing it and tuning it. Even with the workshop ordering it, installing and tuning it, it would still end up cheaper than buying the PFC and tuning the PFC.

www.nistune.com It would be cheaper if you ordered it and had someone you know who is good at micro soldering to install the daughterboard. Otherwise a workshop can do all the work of installing it and tuning it. Even with the workshop ordering it, installing and tuning it, it would still end up cheaper than buying the PFC and tuning the PFC.

but if money wasnt an issue out of the two, which would you go for? Just thinking about it from a logical point it seems that a complete aftermarket ecu would be much better then a piggyback style ecu? no?

correct me if im wrong =]

go the nistune...

what are you reasons?

even if money is no object nistune would generally be a better option for a street car. its not a piggyback, yes it retains the standard ecu but modifies it so its fully programmable, the benefits of this are it looks 100% stock and you retain all the factory cold start and idle features which the power fc isnt as good at.

When you say its better for street car because of it looking 100% stock, retaining factory features ect. What about in terms of tunability? would you say the nistune falls behind the PFC in this situation?

for someone like me who dosnt care about the stuff you mentioned but just wants the most of the setup, making big numbers while keeping the midrange nice and phat, whats your input?

When you say its better for street car because of it looking 100% stock, retaining factory features ect. What about in terms of tunability? would you say the nistune falls behind the PFC in this situation?

for someone like me who dosnt care about the stuff you mentioned but just wants the most of the setup, making big numbers while keeping the midrange nice and phat, whats your input?

I would say speak to your tuner. End of the day, they are the ones tuning it, and that's what determines how good it is.

pfc doesn't have a knock map

so if for some reason your car is detonating you blow your engine.

the oem computer just turns back the timing

The enough of a reason to make me use the oem computer

pfc doesn't have a knock map

so if for some reason your car is detonating you blow your engine.

the oem computer just turns back the timing

The enough of a reason to make me use the oem computer

Only good if the tuner adjusts the knock maps though. Seen a few people have issues where the knock map is left standard (or just copied from the tuned map), engine knock, ECU switches to knock map and it either does nothing or reverts to stock :wacko:

Knock maps are not yet available on most nistune ecu's.

Therefor knock maps are best to be copied from the tuned map. The tuned map should be tuned so there is no knock anyway and "shouldnt" be on the limit of knock.

For a street car i would recommend nistune.

For a car that see's the circuit i would prefer power fc or any other ecu with injector trim to help keep the back cylinders of the motor alive.

Unfortunately nistune doesnt offer this at the moment.

Knock maps are not yet available on most nistune ecu's.

Therefor knock maps are best to be copied from the tuned map. The tuned map should be tuned so there is no knock anyway and "shouldnt" be on the limit of knock.

For a street car i would recommend nistune.

For a car that see's the circuit i would prefer power fc or any other ecu with injector trim to help keep the back cylinders of the motor alive.

Unfortunately nistune doesnt offer this at the moment.

Agreed a car shouldn't be on the limit of deto. However if a fuel pump was dieing and you were getting low fuel pressure or you dropped off a waste gate line and you were free boosting. lost of different things can cause knock and can happen while your driving it as well

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...