Jump to content
SAU Community

Recommended Posts

hi guys,

i was gonna install a fcd to my skyline but have been talked out of it and told to use a nistune chip and tune everything properly, as they are better for the engine and still relatively cheap. who has one of these chips?? and if anyone has any advise like wether i should try one of them or just spend the extra money and get a pfc??

would b great for a little help and cheers in advance

Link to comment
https://www.sau.com.au/forums/topic/364280-nistune-chip-or-spend-extra-for-pfc/
Share on other sites

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

www.nistune.com It would be cheaper if you ordered it and had someone you know who is good at micro soldering to install the daughterboard. Otherwise a workshop can do all the work of installing it and tuning it. Even with the workshop ordering it, installing and tuning it, it would still end up cheaper than buying the PFC and tuning the PFC.

www.nistune.com It would be cheaper if you ordered it and had someone you know who is good at micro soldering to install the daughterboard. Otherwise a workshop can do all the work of installing it and tuning it. Even with the workshop ordering it, installing and tuning it, it would still end up cheaper than buying the PFC and tuning the PFC.

but if money wasnt an issue out of the two, which would you go for? Just thinking about it from a logical point it seems that a complete aftermarket ecu would be much better then a piggyback style ecu? no?

correct me if im wrong =]

go the nistune...

what are you reasons?

even if money is no object nistune would generally be a better option for a street car. its not a piggyback, yes it retains the standard ecu but modifies it so its fully programmable, the benefits of this are it looks 100% stock and you retain all the factory cold start and idle features which the power fc isnt as good at.

When you say its better for street car because of it looking 100% stock, retaining factory features ect. What about in terms of tunability? would you say the nistune falls behind the PFC in this situation?

for someone like me who dosnt care about the stuff you mentioned but just wants the most of the setup, making big numbers while keeping the midrange nice and phat, whats your input?

When you say its better for street car because of it looking 100% stock, retaining factory features ect. What about in terms of tunability? would you say the nistune falls behind the PFC in this situation?

for someone like me who dosnt care about the stuff you mentioned but just wants the most of the setup, making big numbers while keeping the midrange nice and phat, whats your input?

I would say speak to your tuner. End of the day, they are the ones tuning it, and that's what determines how good it is.

pfc doesn't have a knock map

so if for some reason your car is detonating you blow your engine.

the oem computer just turns back the timing

The enough of a reason to make me use the oem computer

pfc doesn't have a knock map

so if for some reason your car is detonating you blow your engine.

the oem computer just turns back the timing

The enough of a reason to make me use the oem computer

Only good if the tuner adjusts the knock maps though. Seen a few people have issues where the knock map is left standard (or just copied from the tuned map), engine knock, ECU switches to knock map and it either does nothing or reverts to stock :wacko:

Knock maps are not yet available on most nistune ecu's.

Therefor knock maps are best to be copied from the tuned map. The tuned map should be tuned so there is no knock anyway and "shouldnt" be on the limit of knock.

For a street car i would recommend nistune.

For a car that see's the circuit i would prefer power fc or any other ecu with injector trim to help keep the back cylinders of the motor alive.

Unfortunately nistune doesnt offer this at the moment.

Knock maps are not yet available on most nistune ecu's.

Therefor knock maps are best to be copied from the tuned map. The tuned map should be tuned so there is no knock anyway and "shouldnt" be on the limit of knock.

For a street car i would recommend nistune.

For a car that see's the circuit i would prefer power fc or any other ecu with injector trim to help keep the back cylinders of the motor alive.

Unfortunately nistune doesnt offer this at the moment.

Agreed a car shouldn't be on the limit of deto. However if a fuel pump was dieing and you were getting low fuel pressure or you dropped off a waste gate line and you were free boosting. lost of different things can cause knock and can happen while your driving it as well

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • thanks mate, one of the reasons I even bought it to be fair.
    • I found parts on EFI Solutions webshop that seemed to be the accurate ones. I haven't gotten around to fitting the turbos back on the car yet since I still have to deal with the shitty crack in the engine block. But I'm confident that the bolts I ordered will fit. According to EFI they are also 7-16/24. The reason M11x1 got involved here is because it is apparently very similar to 7-16/24.
    • Well, to be fair to the car I've driven it daily for almost a decade now, although in that time only put on 50k, as it just recently passed 100k miles early this year. For the most part its been fine because I've been able to source parts from AUS like jacks jdm and a few places in Japan, some things like pads have been easy since 300z pads swap right in... I realize its probably at that time in its life i should find a new DD (but I rent and only have so much space, no garage) so new cars just complicate things. As it is older though, I recognize its about that time as with my '67 GTO to maybe side step and find an alternative, but if i can keep driving it... I want to.   That said, I may just look into a local shop that might be able to, problem is the mechanic I work with has limited space as a mom and pop operation, and he's a busy busy man, so id need to find out if he can keep the car in the meantime, which may or may not be practical for him. Maybe I'll just buy one off jacks jdm and get that refurbed /shrug.. just looking at options and what others may have to offer for advice on the matter. Like I said, its hard finding people around here who actually have one, I've had mine 9 and a half years and I've met 3 others, and they are all military, one was oem from 95 with 30k miles (rip that car... guy got hit after someone crossed s double yellow, totaled it)
    • I've noticed my rear springs sag a bit compared to the fronts. I have stock springs and KYB struts. The front wheels are pretty consistent in their ride height, but compared to the front wheels, one of the rears sits 20mm lower, and the other 40mm lower. This negatively affects the ground clearance, and also angles the headlights up. What are some some economical options for new springs? Or information like good spring rates, lengths  in order to find a suitable replacement etc Far from lowering the car, I'd prefer to raise it a bit to keep it ground clearance friendly.
    • I searched for ages as well, I'm importing an engine to get the head off it. 
×
×
  • Create New...