Jump to content
SAU Community

Recommended Posts

  • Replies 169
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Couple of front drivers that come to mind

Sunny Gti (non turbo FWD) has been past state champ and regular 2wd champ (has a big HP SR20DE)

674906016_byuvD-L.jpg

Mirage Cyborg (the one and only Kel nav's in this one!)

986336628_q2QFc-L.jpg

This was the first gravel car I navved in

631751463_BW4Pv-L.jpg

Surprisingly quick for 1.3 litres!

But with all the front drivers they just have to have an LSD and a close box to be remotely exciting (as the three I listed above all have).

Edited by PHaT MR30

But with all the front drivers they just have to have an LSD and a close box to be remotely exciting (as the three I listed above all have).

LSD is the tricky part, ours has the 4 speed with a high/low range thingymebob.

No LSDs avaliable for the thing, and I doubt a front driver would like a welded centre lol

FWD's regularly punch above their weight on the loose stuff.

Stock standard Excels hose much "faster" cars regularly. In my Civic, I usually take out my class (U16), as well as top 3 in the U2L and O2L in the 2WD categories, as well as a few of the AWD's in the dirt sprints I attend. Might be a different story in the forests, but I know that with a good steerer, my car is capable of top ten finishes at state level.

Well set up and driven FWD rally cars will almost always be quicker than their RWD cousins. Heck, I've seen some unlikely FWD's hose faster RWD cars (including a bock stock TR Magna auto)

You don't need a LSD and CR box, but it always helps. The general consensus is that a welded diff in a FWD is a very bad idea.

Well setup means $$$

I dont like spending $$$ lol espesially on a car that MAY have no potential what so ever

The thing im worried about is the lack of parts for a a Cordial...I mean when was the last time you saw a cordia compete in....well....anything?

It is something I will have to discuss at length.

Under PRC Regulations they aren't eligible, due to capacity...

Are you sure? I haven't looked at the PRC rules in a while, but back when I was rallying i don't think there was anything in the rules to stop a GTR from being eligible.

Edited by hrd-hr30

Zebra, get in touch with Danny Murphy from DMA motorsport in Melbourne, tell him Ian Plendo sent you... He ran a turbo Cordia for a while, with very little success... The prob was with it being turbo and torque steering, he may have some good ideas as to setup. FWD is HEAPS better on dirt as long as you do it right. PM me when you are doing an Amsag and I will come say hello, spent 2 years rallying a Camira (1 in amsag) and 2 years in an AE101 levin including winning the NSW p2 championship. Then moved onto AWD. My hint would be to look into limiting the amount of steering lock, this will drastically extend the lifespan of your driveshafts. We do it by getting nylon spacers in the end of the rack.

The other thing is to get a feel for using your left foot on the brake, trick is to brake in with your right foot so you can use the clutch, then once you get the nose in go to left on the brake. I never actually used the handbrake much.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi. This is just my curiosity because iam sure the tuner figure something out...but either way i want to ask. The "problem" is that the Nistune ECU (Stagea FW and RB25DET NEO from Stagea) sees many times the speed than the speedo does(he says the speedo show 120 km/h - correct speed and the ECU shows like 510km/h ) I told him that this car/tranny getting speed from rear diff. If iam not mistaken the RB25DET NEO "need" to see tranny speed sensor? (my tranny has the plug for it). So couple of "question" If he connects/wire the speed sensor to the tranny...are the signals gonna intervene and if...what if he disconnects the rear diff one and the speedo stops working? Or the "new" sensor from the tranny "take over" and will not going need the one from diff? As i said i know he figure/get that done...iam just curious to know what are the solutions 🙂 
    • Your IACV is set to idle too low. You need to adjust it via the screw Duncan mentioned. From memory it should be 650rpm with the valve electrics unplugged. What is it trying to idle at with the IACV plugged in?
    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
×
×
  • Create New...