Jump to content
SAU Community

Recommended Posts

Hi there

I have just fitted a series 1 RB25 turbo to my 89 GTST/4 RB20

Every thing was ok with the RB20 turbo, but now nothing much happens until 4000rpm +

The car has a front mount, dump pipe, manual boost control (set at 14lb)

When it does come on boost it really goes hard but below 4000rpm its a pig, real laggy

The engine is healthy, good compression (about 165lb x 6 ) Also the new turbo is smooth and spins free.

I read the forums, and it would appear that lag should not be a problem doing this conversion.

Any help would be appreciated

Link to comment
https://www.sau.com.au/forums/topic/364814-turbo-lag/
Share on other sites

i would point a finger at the wastegate actuator...

there is virtually no noticible difference in response between these turbos on an rb20...

make sure that the wastegate arm is as tight as possible, i remember when i changed my turbo on my r32 last time the bolts were ever so slightly loose on the actuator bracket and ti caused epic wastegate leakage

for what its worth i think that running the RB20 turbo actuator on the RB25 turbo results in more boost... i think, could be the other way around tho lol...

Link to comment
https://www.sau.com.au/forums/topic/364814-turbo-lag/#findComment-5820577
Share on other sites

  • 5 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
×
×
  • Create New...