Jump to content
SAU Community

Recommended Posts

  • Replies 436
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

So is that gospel then? have run a 11.92 previously, hoping to run quicker this time.

Do i need to hook up something or will it get through scrutineering ok?

I wouldnt be to worried about it. Normally at these events you self scrutineer your car anyway. I would just throw a blue triangle on the car just so they know where the islation switch is. I have run an 11.0 and i am meant to have a lot more safety gear in the car than i do have and they have never said anything to me about it. I would be more concerned about an ANDRA licence than the isolation switch. You do have an ANDRA licence dont you? They can probably be purchased on the day but its quite a bit more expensive doing it that way. If you plan on continuing to race the car it would be much cheaper to buy a yearly licence

Bank transfer done.

Emailed entry form.

We may finally have that race Brad (ido09s) :thumbsup:

Oh sweet. Will be good to catch up mate and have that long awaited race :nyaanyaa: How did your car go on E85? Did you make much more power? Ours went backwards according to the rollers hehe

Given the event is only a week away and there is only around 30 competitors.... is it going to go ahead or not? Unless the club makes up for the shortfall in costs i thought that WSID had a minimum of 40 cars, max of 50, for these private hires.

It's all in the first post;

4. Club Execs will be at the entry gate from 830am until 10am to hand out tickets. Get there before 10am to get a ticket, we wont stand there all day as we're there to enjoy the day aswel :)

IDO09S, Aaron (1320ft) has made himself available to be there on the day and can issue the ANDRA licences. I am sure he will post in here to answer any questions.

As usual, I wouldn't be surprised if there were a number of last-minute entries and SAU reached the minimum 40 entries. The track day is booked and it's going ahead...unless the track isn't ready :unsure:

Awesome about Aaron being there :rolleyes: Aaron is pretty fair with running the joint from an ANDRA perspective

I am with you on the track conditions..... have they had a street meet yet to get some rubber down? We might be the first to christen the new surface, which i wont be happy about to be honest :( The new management is doing an awesome job with the place though. Its come ahead in leaps and bounds since the departure of Jim Read

Oh sweet. Will be good to catch up mate and have that long awaited race :nyaanyaa: How did your car go on E85? Did you make much more power? Ours went backwards according to the rollers hehe

Getting tuned, will find out next week mate :whistling:

Edited by petern

Hey fellas, I don't know if WSID will let us run our GoPro's but I have the three for the club up for rent. Is $35 paid on the day. That includes me making DVD copy of the video files and mailing them to you about a week after the event.

PM me for reserving one. First in, best dressed.

I ran mine inside the car and have had no problems.. I Dont think outside the car is allowed..

Entries will be updated shortly, we are closing in on the 40 entrants :)

I always have my gopro hanging from the sunroof inside the car and they havent pulled me up on it so far.

I would like to try it outside the car this time so lets see what they say.

Cars use them on the outside all the time so i doubt they will have any problems with it.

The new management seems to be a bit more laid back than the old management which is good to see as they were pretty hard assed on trivial things previously

If you like Jarrod just send me a PM with all of your details that should be on the form and ill do it for you.. (im thinking you are just using microsoft word viewer not the actual program so you cant edit documents)

This event is absolutely going forward, and it's going to be great :D

There are about 15 spots remaining until we are full, but WSID require us to cut off entries after this weekend.

So get in quickly!

Thats fine, Matt is being paid to cover the event and the agreement I made with him is that he's the only one who will get a Media pass on the day but around the pits or from the stands is no drama.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...