Jump to content
SAU Community

Recommended Posts

Hes telling me what I want to hear because hes actually saying 450hp can be done and telling me parts to do it with.

I've looked at most of that RB25 build thread and its given me alot of options which is where I took most of my ideal parts from.

Not really fussed on the overall price, parts are cheap! I really cant get over how cheap aftermarket parts are for these things.

The 3076 just seems a little small to me. which is why im opting for the 3582 or 3540.

sriver killer, dont be so bloody stupid.

Im a revhead, obviously, all i want is a high mount turbo, screamer, big top end rush, big frount mount and over 400rwhp. (AS A STARTING POINT) The cars can be had for cheap and modified for cheap.

Thats why im here. I dont care if its got lag til 4000rpm. I dont care if its obnoxiously loud. I know what I want, im asking for advice to get what I want, it may not be the ideal setup or as fast as some other set upts or as cheap, but its what I want!! not be told its going to be shit, laggy, etc etc.

And having worked on a mates VL turbo with a stock internal RB25 in it, chinese manifold, monsta brand super T70, chinese inlet manifold, hybrid cooler, 300 dollar home made exhaust, cheap ebay fuel system. it made 300rwkw and ran 12.8@116mph with a gay launch. 2.3 60ft. the only decent thing in that car was the tune by incar at wetherilpark.

Thats what makes me want the stuff I want!!

3582R is a 3040R same same... They are dogs of turbos on RB25's!

For instance a high mount kit like mine makes a lot more power than your suggestions, for a lot cheaper and with a lot better response :)

Plus runs 1.8sec and 17mph faster than you mates lighter VL haha

Except the fact that 300rwkw and 116mph in a VL don't add up...

:glare:

300rwhp is around 116mph in a VL

3582R is a 3040R same same... They are dogs of turbos on RB25's!

Actually they aren't quite the same. A GT3040 is GT3082 so it has the smaller 60mm turbine.

They aren't anywhere near as doggy as people make out here on the forum. Sure there are better turbos out there today (and probably yesterday too) but on an RB25 they make power pretty much the same as the GT3076 but have too much compressor flow for the turbine. So wheeling around the extra drag of the larger compressor means you possibly lose some transient response.

At the right price they are an option to consider if you are on a budget and can find one in good nick 2nd hand.

Actually they aren't quite the same. A GT3040 is GT3082 so it has the smaller 60mm turbine.

They aren't anywhere near as doggy as people make out here on the forum. Sure there are better turbos out there today (and probably yesterday too) but on an RB25 they make power pretty much the same as the GT3076 but have too much compressor flow for the turbine. So wheeling around the extra drag of the larger compressor means you possibly lose some transient response.

At the right price they are an option to consider if you are on a budget and can find one in good nick 2nd hand.

sorry that was a typo, was meant to say 3540 not 3040. If you look he posted 3540 :-)

Except the fact that 300rwkw and 116mph in a VL don't add up...

:glare:

Hey shouldnt 300kws be faster than 12.8 my bro's r33 does 13flat with only 210kws.. do they have massive wheels spin with only 2wd???

  • 1 month later...

long time no post.

Ok, so the cars got more than I originally thought.

Forged rods and pistons, tomei cams and cam gears, high flowed turbo with bigger compressor housing and stainless steel shaft/wheels, high flow fuel pump and 480cc injectors. twin plate clutch, 1.5way lsd.. screamer pipe and a few other odds and ends..

Ive ordred a blitz/trust intercooler, purely for better flow over the shitty hybrid one on there. forward facing plenum, 90mm t/b.. hks fuel rail and 740cc injectors, sard fuel pressure reg, surge tank and bosch 044 ext pump.

Going to CRD for a aftermarket ECU and custom tune,

Hopefully get something decent out of it.

;)

keep you guys updated..

honestly if you just want the show and sound factor of big turbo/ext gate maybe look at a trust kit? like a TD06 or T67 with gate?

that will make a nice 250-300rwkw and give the looks and sound you want.

btw what is a "blitz/trust" intercooler?

honestly if you just want the show and sound factor of big turbo/ext gate maybe look at a trust kit? like a TD06 or T67 with gate?

that will make a nice 250-300rwkw and give the looks and sound you want.

btw what is a "blitz/trust" intercooler?

I was looking on ebay, type in trust cooler, and it comes up with a blitz one, type in blitz and it comes up with a 'blitz/trust' intercooler..

I dont know if they are different or one and the same. but aslong as it works i dont care. and im not spending a couple of grand on a nismo one.

As for the trust turbo kit you've mentioned I had a look at them, they look ok. But i'll stick with the high mount manifold and GT3582, .84 rear that im looking at for now.

I want more than 300rwkw now knowing its got forged internals and what not. Just keep pushing it until we find its happy limit. I can see me blowing it up and starting over lol.

Cant do a hell of alot to it at the moment as im driving it daily while the XR8 is off the road gettin some mods done to it, its not what I planned, I only wanted the skyline to come out

weekends and trackdays. but hopefully the xr8 will be back on the road soon and the skyline back in the garage to finally get my hands dirty on it.

  • 6 months later...

Another update, pics soon.

The engine has come out after it emptying the sump out of the catch can after 2 full boost pulls.. then finding compression to be 60psi on cylinder 1. lol. ops.. 1.7 bar at 9000rpm? maybe the reason why.

The turbo thats on there, im not sure. Its still a low mount but its big. its got a spacer which keeps the front housing about 5mm off the engine, but its almost touching the strut tower, well I think the actuator does.

It is a Garrett and it will be for sale shortly with the manifold, dump, intake pipe, oil feed and drains etc etc.. its MUCH bigger than stock and wasn't laggy . I remember showing a mate that it was getting 1.7bar at 3600-3800rpm. Boost 1st 2nd and 3rd smoked the 255 circuit tyres.

So far no one knows what it is, i'll get it off and go to GCG and see if they can tell me lol.

Anyhow. The engine is out, and was sent off to get machined, honed, bored, decked, grouted and whatever else they do to it.

After recieving it, have filled it with oversize CP pistons, Manley rods, arp bolts, nitto oil pump, acl 'black' series barings and blah.

The head sent to lewis race engines for his 'race' port job, 1mm overisze valves, springs and to be bolted to the block with a tomeii head gasket and arp bolts again.

Still undecided with cams so the tomei poncams stay until a decision is made, ie solid lifter conversion and bigger procams/cam gears and loose the vct.

Plazmaman plenum and t/b to be used with a trust intercooler. Fuel system is getting overhauled. keep the nismo to feed a surge, aeromotive 1500hp pump from surge, big rail and 1200cc injectors for now.

Turbo is a Borgwarner 366.., but that could change, the new EFR 83/74 look great, but so do the GTX35/82R.. Already have a turbosmart 50mm gate, and still waiting on my 6boost manifold.

the HKS exhaust will be pulled off and sold, replaced with a Apexi N1 pro system or 3.5inch Xforce.

Haltech platinum pro is taking care of the tuning side. Havent got a tuner yet lol. Probably Payden.

So as you can see the 400rwhp goal is out the window, will fill up on E85, run 30psi and see what she makes, heres hoping we see 500rwkw..

My comments about parts being cheap, I still kinda agree with that, but lots of cheap parts eventually adds up to 1 expensive bill lol. :P

parts alone so far am over 13k not inc labour because I do the work myself. But its easily a 20k build for someone planing to do similar.

Will still little odds and end that ive no doubt forgot about. IE new radiator, thermos, battery, probably clutch. etc etc..

Cheers,

Matt

Subscribed for the luls

I want to know what you are going to do when you get pulled over and defected, what the hell are you going to do then? and don't say it won't happen, if you have all these silly high mount shiny parts and drive it at 9000rpm with 1.7 bar on the street with a screamer it is simply a matter of time.

Also a GTX35r with E85 willy be laggy.

Subscribed for the luls

I want to know what you are going to do when you get pulled over and defected, what the hell are you going to do then? and don't say it won't happen, if you have all these silly high mount shiny parts and drive it at 9000rpm with 1.7 bar on the street with a screamer it is simply a matter of time.

Also a GTX35r with E85 willy be laggy.

Eatme - Before doing any research and speaking to any tuners I thought T04z.. I stepped it down and snapped up a BW airwerks turbo for a case of beer off a friend.

But after speaking to 4-5 tuners now, they all are telling me the GTX35R twin scroll is the best turbo to use.. 1 tuner is pushing strongly for me to put a EFR on it. All tuners say minimal lag and stupid mid range with strong top end.

Rolls - 1.7bar is just a number, more fuel and boost will be screwed into it til it says enough and just see what we come up with.

Baring in mind its not a daily driver, its a car that will come out of the garage for cruises, track days, wsid, and whatever else. Like once a week, if that!

Will it get defected.. yeah, probably will lol. As if people from the modified car scene are worried about defects these days? fark, its 2012 now, you still take your car for pinks and blues? geez. Phone call and it all goes away.

The car itself stands out like dogsnuts anyway. Its a silver Tommy Kaira with the genuine kit so the massive rear spoiler and low front bar. thats been lowered on hks coil overs to 80mm off the deck, the big tommy kaira sticker up both sides and its got chrome 18in workmeisters with chucky semi slicks on it. Its bound to attract plenty of attention, good and bad.

Plus im not the guy thats going to be cracking gate, throwing flames and painting lines off every set of lights, I leave that stuff to the track. Funnily enough ive only ever been defected by the dogs in blue waiting outside wsid picking people up leaving a legal event that they are pushing for us to do.

Anyway thanks for the kind words of encouragment guys :)

As if people from the modified car scene are worried about defects these days? fark, its 2012 now, you still take your car for pinks and blues? geez. Phone call and it all goes away.

Hope you look forward to joining the 20 blokes that got busted for paying someone at the RTA to get their car off defect. The bloke who was organising it is looking at 2 years jail time.

Hope you look forward to joining the 20 blokes that got busted for paying someone at the RTA to get their car off defect. The bloke who was organising it is looking at 2 years jail time.

Yeah im a bad person blah blah blah.

Im building a car that is going to go like a cut cat and look good doing it, bling, loud noises, whatever. Because you dont approve doesnt mean you need to give me shit.

I dont troll your threads and pick on your attempt at building a car, say your doing it wrong, its shit you'll get defected and whatever else.

A cop, being a prick could defect almost every car on this forum if he wanted to even a stock one. (Yes, also having police friends that have told me this and do, do this). Let the defects come and watch them go. You think im the only one on here that makes a call to get rid of them? People wish they could make a call for shit like that. Rather than changing things, get the car passed then changing things back.. Save the time and hassel and find a dodgy bloke. Note. Funny story - Said policeman friend called me asking if I can get his 200sx a dodgy blue for rego.

Says alot doesnt it.

Yes you could argue, do it right the first time, make it all perfectly legal and passable and don't get defected to begin with, but we aren't in a perfect world, ANY modification is a defect. So its almost impossible.

Then argue about engineers cert and stuff, they are easy to get done aswell. All comes down to making that phone call, they just cost more lol.

No one has to agree with you or do it your way OR the 'right' way. So stop getting your panties in a knot and pull ya head in.

Now i'll sit back and watch the PM's come in from the unfortunate people like yourself that don't have these people to call asking if I can put them onto someone that will engineer their car or clear a defect ;)

Thanks again for the kind words.

Think to, if I was worried about getting busted, would I be posting on a public forum? hmm..

Maybe later this arvo i'll put up some pics of the car :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...