Jump to content
SAU Community

Recommended Posts

One of my 32 GTRs sits around a little - say 6 months since last started. Tried to fire it up the other day using jumper leads from GTR II and she wouldn't turn over. Ended up swapping batteries in the end. I grabbed the dead battery and hooked her up to a jigger I've got that maintains the batteries charge, and it won't charge. If I hook the jigger to any other battery I've got either the red light comes on the charger indicating it needs a top up or the green light comes on telling me the battery is 'full'. So the battery from my oft not used GTR seems to be stuffed. I didn't disconnect it whilst it was sitting around, which in hindsight I probably should have done. So my questions are:

Is my battery stuffed or do I need to hook it up to a proper trickle charger to breath some life into it?

What stuffed the battery? It just sat there after all. Why can't I charge it up? It was new a couple of years ago and gets little use.

How should you store your battery in a car with very infrequent use? (this car is not parked where the jigger can be used). Out of car hooked up to the jigger? Just disconnect and charge up the night before you need to use it?

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/
Share on other sites

Is my battery stuffed or do I need to hook it up to a proper trickle charger to breath some life into it?

What stuffed the battery? It just sat there after all. Why can't I charge it up? It was new a couple of years ago and gets little use.

Thanks.

Thats what killed it... not using it. Get yourself a trickle charger plug it in and leave it. I have one on mine. If I dont put it on charge my car will not start after one week of sitting in the garage!

Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/#findComment-5849143
Share on other sites

Yeah, I know lack of use killed it, but killed it for good? I'd have thought I could bring it back from the dead but it doesn't look that way as it won't charge on my charger / charge maintenance jigger. Is it a chuck out job?

Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/#findComment-5849193
Share on other sites

Thats what killed it... not using it. Get yourself a trickle charger plug it in and leave it. I have one on mine. If I dont put it on charge my car will not start after one week of sitting in the garage!

+ 1. . .batterys that are allowed to go flat frequently will shit themselves and wont recharge, suggest you get a new battery and when its not in use take it out of the car and put it on charge (away from the car) once every couple of weeks, also makes it harder if some f@#ker is trying to steal your car
Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/#findComment-5849195
Share on other sites

your charger may not kick in if the charge in the battery has fallen below a certain voltage. but then if your batt voltage is that low and has been sitting for a while its prob not recoverable.

a sitting battery usually wont die if it still has a charge but a flat battery will die quickly if left sitting

Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/#findComment-5851712
Share on other sites

your charger may not kick in if the charge in the battery has fallen below a certain voltage. but then if your batt voltage is that low and has been sitting for a while its prob not recoverable.

a sitting battery usually wont die if it still has a charge but a flat battery will die quickly if left sitting

Prolly should have said there is a voltage leak somewhere and the battery normally goes dead after 2 weeks. It sat in the car subject to the leak for 6-8 months. Sounds like I've killed it. So new battery needed and this time I'll keep it out of the car (not on concrete) and on a top up charger.

Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/#findComment-5852238
Share on other sites

Change the water in the battery see if that helps... But seriously it cost no more than $60 for a good century battery, just get a new one.

My battery goes shit after a week or two of not driving. Turns over very slowly, not fast enough to fire the engine so needs to be jumped.

Edited by SargeRX8
Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/#findComment-5853504
Share on other sites

Change the water in the battery see if that helps... But seriously it cost no more than $60 for a good century battery, just get a new one.

My battery goes shit after a week or two of not driving. Turns over very slowly, not fast enough to fire the engine so needs to be jumped.

You should never "change" the water In a battery. Just buy some distiller water and top it up with that

Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/#findComment-5853561
Share on other sites

You should never "change" the water In a battery. Just buy some distiller water and top it up with that

Ah lol should have phrased my self a little better but yeah, just get that distilled water from woolies or kmart or something and top her up.

Cheers for pointing it out!

Link to comment
https://www.sau.com.au/forums/topic/366668-dead-battery/#findComment-5855472
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...