Jump to content
SAU Community

Who got canaried on Friday meetup?

DSKYLINE2C

By DSKYLINE2C,
in Victoria

 Share

Recommended Posts

Al Grand Master

Al

Posted
Posted

Did not see any police in or around the carpark. Was not aware of anyone being defected. Unfortunately we had the usual non-SAU hero's that had to prove to themselves how shit there cars are by trying to do burn-outs as they exited the location. I hope these were the people that got defected as they are the people that attract all the unwanted attention :).

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
lol wasn't adam the one who organised the whole thing?

:confused: James and i organised it for him.

But as far as i know, it was only Adam that has any trouble, as he must have had a 'slip' of the foot upon exiting the car-park

Jamezilla Grand Master

Jamezilla

Posted
Posted

Yeah - there was an unmarked across the other side of Telstra Dome that saw Adam 'drift' past.

The police asked him to stop - finished booking the other driver - and then got medievil on him.

A couple of other people were breath tested - but no police were at the carpark (I left at 11pm).

No one (aside from Adam) was defected.

J

doxximus Grand Master

doxximus

Posted
Posted

im guessing its as bad as having no h pattern on ur gear stick, but considering he decided to rip out of the car park in front of cops then they obviously would of wanted to get him for whatever they could considering he did something stupid

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...