Jump to content
SAU Community

Recommended Posts

A couple of quick questions :)

1) Is the RB25DET (R33) Tomei head gasket OK to use on an R34 Neo engine?

2) Is is definitely OK to use a 87mm bore head gasket on a 86.5mm bore engine? I guess this will drop the compression ration slightly.

3) Does the Tomei head gasket come with a oil restrictor, and what size is it?

Thank you!!!!

Link to comment
https://www.sau.com.au/forums/topic/368361-tomei-head-gasket-questions/
Share on other sites

1. Yes

2. Definitely ok

3. I have never ever seen a restrictor come with a gasket and I have bought dozens. But the Tomei Oil Gallery Orifice is 1.5mm as stated above. Refer to the forced induction section for restrictor sizing depending on application and pump being used

1. Yes

2. Definitely ok

3. I have never ever seen a restrictor come with a gasket and I have bought dozens. But the Tomei Oil Gallery Orifice is 1.5mm as stated above. Refer to the forced induction section for restrictor sizing depending on application and pump being used

1, I concur.

2. yes, doctor, I concur.

3. yet again, I concur. the restrictor orifice only comes in the tomei full gasket kits (ie the ones that come with MLS head gasket, exhaust gaskets, inlet gaskets etc. they include the oil feed restrictor. but if you just buy a head gasket on it's own, all you get is head gasket. need to buy a restrictor separately.

Thanks to everyone for the quick replies :)

I will source the restrictor separately.

1, I concur.

2. yes, doctor, I concur.

3. yet again, I concur. the restrictor orifice only comes in the tomei full gasket kits (ie the ones that come with MLS head gasket, exhaust gaskets, inlet gaskets etc. they include the oil feed restrictor. but if you just buy a head gasket on it's own, all you get is head gasket. need to buy a restrictor separately.

Arrgh one more question....

I presume the Tomei 1.5mm oil restrictors for the RB26DETT will also suit a RB25DET Neo??

Thanks :whistling:

Thanks to everyone for the quick replies :)

I will source the restrictor separately.

I'm just asking a noob question but why do you need the restrictor? Is this due to the head gasket change or something else? I thought you change the restrictor if you upgrade oil pump to maintain same flow in oil around the engine... Also noticed many different thicknesses for headgaskets. Does increasing the headgasket size increase bore capacity by that little tiny bit thus requiring a tweak up of the tune?

I'm not nit picking, I genuinely don't know.

the oil feed restrictors are a good idea even with stock oil pumps. especially if your engine is going to see a lot of sustained high RPM use. as kiwi said even a stock oil pump running and long periods of high rpm will flood the head with oil.

as far as thicker head gaskets go they don't increase the bore diameter. they do slightly increase chamber volume which reduces squish and reduces compression ratio. you need to ensure you know what you're doing when chosing head gasket thickness so you get the characteristics you want.

I have actually just bought two Tomei 87mm bore 1.2mm thick RB26 head gaskets and both came with the Tomei 1.5m oil restrictor in the bag. Both head gaskets were bought about 6 months apart and came from two different vendors.

Edited by Ramius83

Damnit!!! I just bought the head gasket and the restrictors separately.... And wasted $21 in the process... Nooooooo!! :)

I have actually just bought two Tomei 87mm bore 1.2mm thick RB26 head gaskets and both came with the Tomei 1.5m oil restrictor in the bag. Both head gaskets were bought about 6 months apart and came from two different vendors.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...