Jump to content
SAU Community

Recommended Posts

Guys, R33s have the battery in the boot, R32s have it in the engine bay.

moo_r32, You don't really have any other choice but to run the power wire from the engine bay to your boot. Keep it on the other side of the car as your RCAs to reduce interference. Make sure you fuse the power cable not more than 30cm from your battery terminal too.

33s and 34s have em in the boot but 32s have em in the engine bay

I moved mine to the boot in my 32 wasnt too hard just have to run a very large cable under the car from the bonnet to the boot

you can get kits which come with all the terminals, battery box and cable etc

if you dont want to move the battery the best place to run the cable is down the drivers side under the carpet dont run it under the plastic moulding run it along the floor

33s and 34s have em in the boot but 32s have em in the engine bay

I moved mine to the boot in my 32 wasnt too hard just have to run a very large cable under the car from the bonnet to the boot

you can get kits which come with all the terminals, battery box and cable etc

if you dont want to move the battery the best place to run the cable is down the drivers side under the carpet dont run it under the plastic moulding run it along the floor

R34's have the battery in the engine bay too - well, mine is anyway....

  • 3 months later...

Yeah battery placement is weird, my SII R33 Sedan has the battery at the front drivers side of engine bay, and overflow bottle on the right hand side near air filter box. Im gonna have to run a power cable to my boot soon as well. Although with no battery in the boot that little shelf makes a nice spot to mount an amp and sub.

Running an earth back to the battery or to the chassi is 6 of one and half a dozen of the other. Easier to use the chassis but for mine I ran one from the battery. The biggest hassel is getting it past the engine bay firewall. Took me ages and a few attempts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
×
×
  • Create New...