Jump to content
SAU Community

Recommended Posts

Just out of interest, did you get it from a distributor in Australia?

Yeah there's a guy on eBay selling them.

Ah. My bad.

Birds when i log in that's the price that comes up. Maybe i've selected a cheapo shipping option or something

Weird!

Nah I don't man, never used Link...in fact that's the first I've heard of them. We don't use Motul products at work and have rarely need Nismo stuff...don't really do aftermarket differentials besides the Ford 9 inchers.

Clunking on corners has reduced a bit in frequency...can get away without it on more low speed turns. Hard to tell whether it's just the diff wearing in or the friction modifier I put in...probably both.

Will definitely try the Motul oil on the next change. Apparently changes have to be done every 3000km on these...yikes!

That's interesting...cause mine is now pretty silent when cold (oil is thicker), yet quite noisy when hot after a while of driving (but no thrashing it around a racetrack). I'm still running the LS90, however, given this development I suspect switching to an 85w140 would produce good (read: quiet) results for me. Will make the switch soon and report back. I loooooove the sound it makes when the tyres drag while turning and there is no banging from the clutch plates involved.

The feeling so far is that these truly are a track car diff. Do not put one in your daily driver if you suffer from Skyline noise paranoia - this thing will have you seeing a psychiatrist in a matter of days :P

I got my 1.5way Kaaz 2nd hand from a SAu member last year and while it ran quiet in his 34 GT-t coupe after a textbook install & run-in procedure, once in my 34 sedan it clunks, shakes and sways the rear end of my car quite violently at times.

The workshop that installed it for me used LS90 which i left in there for approx. 500Km's before changing it out for Kaaz oil. For something that clunked as much as this diff did there was no metal fillings to be seen. The Kaaz oil has been in for about 9-10 months now (approx. over 4000Kms) and I'm considering changing it out for a thicker nulon or motul diff oil, something the previous owner recommended to soften the clunking.

It's been a strange but awesome addition to my car though as it provides great drive when powers applied at the right time locking the diff with no clunking. The strange part? it doesn't matter what temp the whole combo is at, cold, warm, hot - sometimes it's pleasantly smooth and quiet and other times it feels like it's going to shake the rear cradle out of my car.

So thats my history with the above diff centre. Should I change out the Kaaz oil for whats been mentioned or leave it in there?

Reggie.

I'm talking Pro TT in a 1.5 configuration (2 way I've found to be cheaper across brands)...I did see them for $1300 on eBay at one point (talking 12-18 months ago), but by the time I got around to actually wanting one, the seller had no stock left. Now the eBay price is $1600+ last I checked. Biggest appeal for the Nismo was the half shafts that came with it...that and everyone raves about them. Had no idea about Link...however, I did buy this KAAZ about 6 months ago, only just got round to installing.

Nismo Pro TT diff is now discontinued.. I had my heart set on that one just didn't have the $$. Now I'll have to find another alternative in a streetable 1.5 way diff (good luck).

Nismo GT LSD Pro 1.5 way -> 55 degree ramp angle, will be more aggressive than the TT's 45 degree.

Nismo GT LSD Pro Carbon 2 way -> 2 way diff, not so good for the street by all accounts. Also double the price ~AU$2000 since it's just been released.

Cusco RS 1.5 way - ??? (some people seem to like em, others say they're harsh?)

That's exactly the same as what I've been experiencing, however, I have noticed that when it's cold it behaves a lot less clunkily...so will be trying a thicker oil and hopefully reaping the cold benefits all the time.

Change the KAAZ oil out I reckon...people have reported good things about using an XXw140. That KAAZ oil that comes with the diff is designed for running it in anyway.

Another thing that will soften up the clunking is an LSD friction modifier...however...the more you put in, the less effective your LSD becomes at locking up. You could make it completely silent if you wanted to replicate a single spinner lol.

Nismo Pro TT diff is now discontinued.. I had my heart set on that one just didn't have the $$. Now I'll have to find another alternative in a streetable 1.5 way diff (good luck).

Nismo GT LSD Pro 1.5 way -> 55 degree ramp angle, will be more aggressive than the TT's 45 degree.

Nismo GT LSD Pro Carbon 2 way -> 2 way diff, not so good for the street by all accounts. Also double the price ~AU$2000 since it's just been released.

Cusco RS 1.5 way - ??? (some people seem to like em, others say they're harsh?)

Sucks hey. When the KAAZ is doing it's thing, it's a fantastic diff. I'd still recommend it on price and performance alone. Just a lot of wincing on the daily drive.

i've had a car with a minispool but it suited the character of the car ("i'm loud and i go sideways and i scare old ladies and parking valets with my clunking"). R33 is a refined but sporty daily so I don't want it to feel like the arse end is falling out when i go around a corner.

besides, KAAZ only make a 2 way diff. a diff that locks under braking = understeer. i'm set on a 1.5 way so the kaaz not for me, even though it is cheap! :)

I guess it's a GT LSD Pro, and suck it up about the ramp angle (more ramp means more skids!)

  • 2 weeks later...

Huh? My KAAZ is a 1.5 way...you can get 2 way or 1.5 way. Mine doesn't lock under braking, not much anyway.

Just an update:

Dropped the oil and went to put in 85w140...but I only had 700ml of it left at work!!! Cracked the shits and syringed that in, followed by 50ml of anti chatter additive, then topped her up with LS90. The diffs take about 1.6 litres, so it was pretty much a 50:50 mix of oil viscosity.

Driving significantly better now...clunking is a lot quieter and less frequent. The tolerance for it to start clunking mid turn is greater (needs more throttle and a tighter, lower speed turn). It also takes a good 10 minutes of driving before it'll even start doing the clunking. I think my crown and pinion aren't meshing correctly though...have a noise at about 70-80km/h which is pissing me off. Will probably install the centre in another housing / crown and pinion soon.

Seeing my oil supplier don't make LS85w140 anymore, I'm going to order some of the Motul stuff so that I can have 100% 85w140 next oil change. This will hopefully eliminate nearly all of the clunking. If it doesn't I'll just use 75ml of anti chatter and then I suspect she'll be very daily friendly, yet lock up when I want it to...nearly a 1 way :)

Hopefully this doesn't impact the life of the diff too much. I've heard that if the clutch packs slip too much, it can destroy them over time. Fortunately rebuild kits are only about $350 for the KAAZ and I work for a place that does diffs :D

7 years nice, if I can get that out of the car I'll be happy, although I don't think I'll own the car for that long.

http://www.ebay.com.au/itm/Kaaz-LSD-Overhaul-Rebuild-Plate-Set-Nissan-Toyota-Honda-/140399868641?pt=AU_Car_Parts_Accessories&hash=item20b07bfae1

Awesome thanks for that, was just checking ebay as you said before you purchased it off there. Noticed cjmotor deal with them. 7 years it was originally in my s13 then i chucked it in the 32, has been an awesome diff. I have just picked up a nismo mechanical so i can have 2 different ratios for the track. Am keen to see how they back up against each other

I've got a Kaaz 1.5 way and it is just fantastic on the track - improved my lap times by nearly 2 sec over the old "single-legging" viscous LSD

On the road it is a loud and clunky mofo! It sounds like the ar$e is about to drop to of the car, it chirps the tyres and used to actually pull and twist the rear sub frame...

I have the alloy rear sub frame bushes now which helps hold it all together solidly but sends even more noise into the cabin!

There is a reason why these diff's aren't original equipment in road cars they are for track cars only

Any friction modifiers will be decreasing the performance and life of the diff... harden up and deal with it I say :D

I'd harden up if this was my track car, but it's a daily, and people look at you strange when your rear end is banging like that! I don't mind if it decreases performance of the diff a bit. It still locks damn hard in a straight line, and that's what I bought it for, 1 way action, so I'm happy. If I was drifting the thing I wouldn't have put any friction modifier in it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...