Jump to content
SAU Community

Recommended Posts

  • Replies 207
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

Well results are on Natsoft for Calder Round

http://www.natsoft.c...09/2011.CPTD.S4

Looks like entries were low? Well done the competitors from SAU that ran but can't compare your times to anything to know how well you went...

Any feedback from drivers or spectators on the event?

Congrats to John/ssxRicho for taking out Street class, and Russ for Tuner class fastest RWD, and 2nd outright.

All in all a good day, not enough track time, but for good reason.

Something killed the timing system hard line so it all had to be done manually. So they had to change our format to one car out at a time, so it was a warmup, two flyers and a cool down. This was bad especially for us Sunday only guys trying to get some vision of the course. Made for a few funny moments though - I personally went through the drifters course and Russ made up heaps of time bypassing chicanes.

After complaints they changed the format to four out at once, and managed to time it which was much better.

The track was loads of fun. That banked turn is something else pulling close to 2g's you feel like your face is about to melt off. The transition on to the bank and some decent bumps make for great fun. Some sessions were red flagged due to tyres on the track, so they need to be tied together better.

Two days would have been great, was only ready to start working on times in the last session so a practice day would have gone a long way for me. The more experienced guys took well to it.

Would do it again for sure. Good to do something a little different. The more entries and support given for these guys, the more they can polish the event to give us something else to look forward to on the motorsport calendar.

great fun wish i had big brakes cos standards just dont hold up to long LOL!!!! had a ball would love to do it again and have the car better set up for it.

Also Congrats to Adam Newton (Techsport EVO) - Taking outright honours as well. :)

Was a clean sweep for SAU-Vic members (Adam is a member too) in all classes.

Massive Congrats to Richo for winning Street class with a 58.2 (super huge balls to do that on near dead rubber) on the last session of the day to beat my 58.7 ... before i hit a tyre barrier and tookout my front lip, under-tray and what not else I've not noticed yet :D

Pretty happy with my car overall given it's the first real track event I've done in it, need MOAR!

Brian - I would say anything under 56sec on semis was moving, and anything under 1min on streets was the same.

Paul - Totally agree with your post/thoughts, was good to meet you as well finally.

Huge Congrats to Amy, Andrew, Brett & other staff from Trackbattle/ADGP - some minor niggles but overall a great 2 days.

I say do it @ the Thunderdome again next year, the bank is just fken awesome.

Also Congrats to Adam Newton (Techsport EVO) - Taking outright honours as well. :)

Was a clean sweep for SAU-Vic members (Adam is a member too) in all classes.

Ah yes thats right big red - im still a bit new! Congrats Adam for a great drive. My Mrs said "he seems to have complete disregard for the underneath of his car!".

Also you Ash - you guys must have really been moving to get those times on street rubber. Whats wrong with me lol!

G-plot of my last session.

post-12551-0-97678200-1316989857_thumb.jpg

Ah yes thats right big red - im still a bit new! Congrats Adam for a great drive. My Mrs said "he seems to have complete disregard for the underneath of his car!".

Also you Ash - you guys must have really been moving to get those times on street rubber. Whats wrong with me lol!

G-plot of my last session.

lol complete disregard doesn't do that bloke any justice, far worse than that... But it's what makes him quick!

You just need to settle into the car a bit more mate. I daily drive mine so I've a fair idea of how it handles. Plus I've done a few SAU-Vic DECA days, which are a good place to test out grip levels etc. You should come along to those too.

Interesting plot of the G's - you logging that from the onboard sensors?

Interesting plot of the G's - you logging that from the onboard sensors?

Nah not the onboard sensors - the vbox works it out from GPS & time. Pretty sweet.

Yep next DECA will be there with bells on.

Richo had i think 2 sessions of mine on his GoPro, so no doubt he'll upload that @ some point.

There were heaps of other cameras too so hopefully more footage should appear.

Here is one Martin has already done

WORK WARNNING FOR COMMENTARY

Russ made up heaps of time bypassing chicanes.

Would do it again for sure. Good to do something a little different. The more entries and support given for these guys, the more they can polish the event to give us something else to look forward to on the motorsport calendar.

:thumbsup:

lol awesome commentary!

When I watched the first video of the circuit I thought to self, "that corner is prime for a big cut".... and there ya go, the fast guys cut it.

It can only be expected the fast competitors would cut it, because every other fast guy would cut it, so yeah, you have to cut it! lol

It should have had a barrier or tyre post there really.....

Ye there were cones put there later on!

On the first day hardly anyone was cutting, and then on the Sunday one started doing it, so everyone did it in the next session haha, then cones arrived!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...