Jump to content
SAU Community

Recommended Posts

Hi guys, ive searched around these areas but i cannot find a straight answer for which engine oil i should run in my RB25DE Skyline.

The car will be used on the street/daily and wont see the track (atleast for a while).

can you guys please recommend me which oil to use.

Thanks in advance :)

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/
Share on other sites

depends on how much you want to spend. all you really need though is a 10w 30 semi synthetic oil, although you could use a basic mineral oil if you were strapped for cash, but i'd stick with the semi. if you want to go all out you could go a full synthetic, but to be honest, for a natro skyline i wouldn't bother. as for brand, that is really personal choice and everyone will have and opinion as to what is good.

you could have a read through this thread for some opinions

http://www.skylinesaustralia.com/forums/topic/22458-the-goods-on-oils/

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5890910
Share on other sites

I remember I read that thread when I was looking for what oil to get... what a marathon

I use Mobil1 fully synthetic ... forgot the numbers but its in a silver coloured container

10w 30 im quite sure it is though

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5890995
Share on other sites

Any of the nulon range are good.

LOL^

I use penrite mineral 20 - 50 (60) Extra 10.

serves me well

but don't get their 20 - 60 stuff, i only use that thick cause my engines 33 years old.

Get the next weight range down or 2

Edited by Socrates
Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5891799
Share on other sites

Any of the nulon range are good.

Yer im with Dan ive been using a full synth Nulon for the last two oil changes, seems to do the job quite nicely.

But yer in all honestly, and semi/full synthetic oil will be fine as Mark stated.

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5893256
Share on other sites

yer like dan said, any of the nulon stuff is not to bad. I use a full synth in my 25de and it seems to be ok i cant remember exact numbers, but in all honesty as mark said before any semi/full synth oil of the right grade will be fine, its really just comes down to what branding u prefer :)

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5893260
Share on other sites

thanks everyone for the help. so i should go ahead and get 10w 30 either fully synth or semi, in the brand of my choice. sounds easy enough :)

I remember I read that thread when I was looking for what oil to get... what a marathon

yer thats how i felt, just couldnt get a straight answer, plus everyone having different engines, eg N/A, turbo

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5893272
Share on other sites

10W30 recomended for RB25DE, i go with Valvoline Synpowers for my last service found it quite good and after 5-6 months still has the rich honey like color to it after 2300km of driving. However never 100% impressed im going to try Royal Purple, a friend with a S15 uses it and recomends it for japs cars so ill give it a go.

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5893552
Share on other sites

I Use mobil1 5w 50 .... planning to change on something else after the 100k service though

I only change every 6 months as well ... thats generally only about 5-6 thousand kms as well, i dont drive the skyline all that much .. its still very clean at the end of every oil change so i havent seen the need to change it more often

i think the motul stuff has been quite highly recommended as well

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5893747
Share on other sites

we use mobil1 at the moment cos my dads been using it since his good old days

probably going to try something else though maybe a 10w 40 or 10w 30 fully synthetic. i dont really change my oil often enough though, should probably go for something a bit cheaper but still fully synthetic and change it more often .. im paying about 80 bucks for a bottle of oil atm with mobil 1 and ive seen some castrols go for a fair bit less ... or even the motuls were going for a decent price ..

that thread on oils confused the hell out of me lol

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5894915
Share on other sites

I don't recommend nulon, mainly cause of the price. I believe cheap = cheap quality product.

I out nulon in the same basket as el cheapo gulf western.

lol, whilst I agree with you regarding how shit the Nulon oils are, Gulf Western's Sougi S6000 was every bit as good as Motul 300v (Group V Ester base stocks)... $60 for 5L too!

Just a damn shame they aren't making it anymore :(

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5898097
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...