Jump to content
SAU Community

Recommended Posts

Hi guys, ive searched around these areas but i cannot find a straight answer for which engine oil i should run in my RB25DE Skyline.

The car will be used on the street/daily and wont see the track (atleast for a while).

can you guys please recommend me which oil to use.

Thanks in advance :)

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/
Share on other sites

depends on how much you want to spend. all you really need though is a 10w 30 semi synthetic oil, although you could use a basic mineral oil if you were strapped for cash, but i'd stick with the semi. if you want to go all out you could go a full synthetic, but to be honest, for a natro skyline i wouldn't bother. as for brand, that is really personal choice and everyone will have and opinion as to what is good.

you could have a read through this thread for some opinions

http://www.skylinesaustralia.com/forums/topic/22458-the-goods-on-oils/

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5890910
Share on other sites

I remember I read that thread when I was looking for what oil to get... what a marathon

I use Mobil1 fully synthetic ... forgot the numbers but its in a silver coloured container

10w 30 im quite sure it is though

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5890995
Share on other sites

Any of the nulon range are good.

LOL^

I use penrite mineral 20 - 50 (60) Extra 10.

serves me well

but don't get their 20 - 60 stuff, i only use that thick cause my engines 33 years old.

Get the next weight range down or 2

Edited by Socrates
Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5891799
Share on other sites

Any of the nulon range are good.

Yer im with Dan ive been using a full synth Nulon for the last two oil changes, seems to do the job quite nicely.

But yer in all honestly, and semi/full synthetic oil will be fine as Mark stated.

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5893256
Share on other sites

yer like dan said, any of the nulon stuff is not to bad. I use a full synth in my 25de and it seems to be ok i cant remember exact numbers, but in all honesty as mark said before any semi/full synth oil of the right grade will be fine, its really just comes down to what branding u prefer :)

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5893260
Share on other sites

thanks everyone for the help. so i should go ahead and get 10w 30 either fully synth or semi, in the brand of my choice. sounds easy enough :)

I remember I read that thread when I was looking for what oil to get... what a marathon

yer thats how i felt, just couldnt get a straight answer, plus everyone having different engines, eg N/A, turbo

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5893272
Share on other sites

10W30 recomended for RB25DE, i go with Valvoline Synpowers for my last service found it quite good and after 5-6 months still has the rich honey like color to it after 2300km of driving. However never 100% impressed im going to try Royal Purple, a friend with a S15 uses it and recomends it for japs cars so ill give it a go.

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5893552
Share on other sites

I Use mobil1 5w 50 .... planning to change on something else after the 100k service though

I only change every 6 months as well ... thats generally only about 5-6 thousand kms as well, i dont drive the skyline all that much .. its still very clean at the end of every oil change so i havent seen the need to change it more often

i think the motul stuff has been quite highly recommended as well

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5893747
Share on other sites

we use mobil1 at the moment cos my dads been using it since his good old days

probably going to try something else though maybe a 10w 40 or 10w 30 fully synthetic. i dont really change my oil often enough though, should probably go for something a bit cheaper but still fully synthetic and change it more often .. im paying about 80 bucks for a bottle of oil atm with mobil 1 and ive seen some castrols go for a fair bit less ... or even the motuls were going for a decent price ..

that thread on oils confused the hell out of me lol

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5894915
Share on other sites

I don't recommend nulon, mainly cause of the price. I believe cheap = cheap quality product.

I out nulon in the same basket as el cheapo gulf western.

lol, whilst I agree with you regarding how shit the Nulon oils are, Gulf Western's Sougi S6000 was every bit as good as Motul 300v (Group V Ester base stocks)... $60 for 5L too!

Just a damn shame they aren't making it anymore :(

Link to comment
https://www.sau.com.au/forums/topic/369569-what-oil/#findComment-5898097
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...