Jump to content
SAU Community

Recommended Posts

Have been to Saturdays with PIARC.

They run 4 groups.

Open Wheel

Race Cars (v8 super cars, GT cars etc ec)

Experienced Drivers / Fast Cars

Inexperienced Drivers / Slow Cars

For you, I would select Race.

As for who turns up....well anything.

I have seen, Lambo GT, Porsche Cup cars, V8 Supercars etc etc.

You also get the guys out for a paddle around the track, but they will be grouped in the slow group.

The Fast Group is really anything faster than 2mins. Race is anything faster than a 50 from the time they were doing.

These days are a line up, once the track reaches max density for the session that is it. You wait. Though I have never been in the fast group with more than 10 or so other drivers on the track.

You can get CAMS on the day, though only if you are a PIARC member?

Did you get RaceChrono up and running? As there is no timing on Saturday with PIARC.

Link to comment
https://www.sau.com.au/forums/topic/369906-piarc-9-10-july/#findComment-5896027
Share on other sites

You can go to CAMS in malvern / caulfield and get it done on the spot, cost an extra $70.

Alt is to send it via mail and wait for the WRX round at PI on the 20th of August. CAMS will take 10-15 days to come through to you.

Link to comment
https://www.sau.com.au/forums/topic/369906-piarc-9-10-july/#findComment-5896137
Share on other sites

Did you want to share a garage John? I think they are $150 for the day. Might be able to get 3 of us so we only pay $50 each.

I'm thinking it's only worthwhile if it rains.

Also I don't think I have any pit crew that can make it. Anyone wanna come down and lend a hand?

Link to comment
https://www.sau.com.au/forums/topic/369906-piarc-9-10-july/#findComment-5899404
Share on other sites

You can alway email the sprint sec from PIARC contacts. Theresa accepted my scan to PDF and mentioned I could pay on the day.

I'll think on garage, do you book before day? as not normally bothered. Still forecasting 1mm but pretty strong winds, shiver.

Link to comment
https://www.sau.com.au/forums/topic/369906-piarc-9-10-july/#findComment-5901004
Share on other sites

Russ email tajford (at) gmail.com

Just fill the form in and scan it / take photo with camera. It is what I do. Then pay on the day.

I will be smashing Sandown on Sunday and shooting some stuffs on Saturday but not till 3pm. So can be there in the morning till 1:30pm'ish

Link to comment
https://www.sau.com.au/forums/topic/369906-piarc-9-10-july/#findComment-5901107
Share on other sites

Hey Russ - I like PIARC Saturdays. Longer sessions (timed 20mins rather than 3 flying laps) - so usually 8 or so laps. It really lets you get into a rhythmic around that place. Presuming the car is up to it.

Of course as with all PIARC days clean laps is pretty hard (in fast cars anyways) since there is no grouping really. But if you stress less about times and just get a feel for your car and the track then you will get a lot of of those days.

It would be a great weekend for you too Paul if you can get there. Just make sure you manage your tyres there (keep and eye on the front right tyre and rotate the tyres around the car if needed).

Link to comment
https://www.sau.com.au/forums/topic/369906-piarc-9-10-july/#findComment-5901189
Share on other sites

Well CAMS charged my card yesterday so hopefully licence is en-route.

If that arrives today / tomorrow and I can enter in time I will be there Saturday.

Just make sure you manage your tyres there (keep and eye on the front right tyre and rotate the tyres around the car if needed).

Definitely worth switching over to a fresh set yeah - those ones on the 9.5's wouldn't be up to the task would they? Or even just choose the best 4 of the used ones?

Link to comment
https://www.sau.com.au/forums/topic/369906-piarc-9-10-july/#findComment-5901237
Share on other sites

Yeah I'll go for Saturday. Got hold of Theresa and she said there are heaps of spots left for both days. Campbell is coming down with me. See how we go with weather. If it's going to be real wet I might stay home. I'll enter on the day.

I'll go with the race chrono lap timer and should hopefully be in a fast group.

Link to comment
https://www.sau.com.au/forums/topic/369906-piarc-9-10-july/#findComment-5901606
Share on other sites

Well CAMS charged my card yesterday so hopefully licence is en-route.

If that arrives today / tomorrow and I can enter in time I will be there Saturday.

Definitely worth switching over to a fresh set yeah - those ones on the 9.5's wouldn't be up to the task would they? Or even just choose the best 4 of the used ones?

PIARC Days you can ALWAYS enter on the Day. If you go both days you can enter both of them on the Saturday. Just bring cash because that's all they'll take though.

But for you mate I'd just switch back to the 4 x 9.5's and go for it. Those tyres will be fine given you won't be going flat out just yet. There was one tyre that was pretty sad but I think it's on one of the 10.5? Just check and don't use that one.

Link to comment
https://www.sau.com.au/forums/topic/369906-piarc-9-10-july/#findComment-5902948
Share on other sites

I'm thinking about staying at home if the weather stays the same. Wet and windy...

I could use the time for more development on my car at home...

Any other PI days coming up that people know of?

Toughen up Princess! :) PI is the best track in Vic in the wet to drive on. LOTS of room for catching slides.

Plus - what are you going to do if its wet and windy @ Superlap?

Link to comment
https://www.sau.com.au/forums/topic/369906-piarc-9-10-july/#findComment-5903702
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...