Jump to content
SAU Community

Recommended Posts

Coming home from work this arvo, cruising on highway and car stalls, WTF

Tried restart, got dash lights, cranks, no PFC handset display, no fuel pump, checked all fuses - nothing

Checked PFC in another R33 - nothing, tried std ecu in mine and all ok except I got 750cc, gt3076r, z32 afm.

So does anyone repair or test power fc?

Can I check with nissan consult?

p.s. Anyone got std R33gtst injectors I can borrow?

Link to comment
https://www.sau.com.au/forums/topic/371844-power-fc-died-r33-rb25det/
Share on other sites

there are places that repair them

you can also get apexi to repair it via nengun.com for official repair

you cant check it with consult so dont bother trying

open the powerfc up and look for any burnt tracks or damage, also smell for any burns

Bit off topic but I was just wondering, if I gave my tune from my PFC to someone that remaps stock ecus could they put my PFC tune onto a stock ecu??

It can be done but you need a nistune in your 33. That will cost about 700. Get your pfc quoted for repairs and go from there. your tuner should have your tune file.

^^ no each ecu code is unique therefore incompatible.

To OP the pfc seems to have lost the input resistor, i can do it for $80, but im sure you could get it done for far less locally.

provided they dont replace the main memory chip you shouldnt loose the tune.

i think thats the only thing no longer available... got two perfect pfc's... but the main "chips" are no good :(

seriously its a easy job to fix. far easier than replacing your injectors.

^^ no each ecu code is unique therefore incompatible.

To OP the pfc seems to have lost the input resistor, i can do it for $80, but im sure you could get it done for far less locally.

I don't think I filled my post enough but what I meant was the tuner can load up the Power FC tune, and mimic the data across to the Nistune ECU. You tuned tao's car I believe, he has given me screen dumps of his timing and ignition maps to provide my tuner. Even though tao runs a Nistune, the tuner was still able to get an idea of how things were running and how to setup the tune.

I don't think I filled my post enough but what I meant was the tuner can load up the Power FC tune, and mimic the data across to the Nistune ECU. You tuned tao's car I believe, he has given me screen dumps of his timing and ignition maps to provide my tuner. Even though tao runs a Nistune, the tuner was still able to get an idea of how things were running and how to setup the tune.

that was sort of what I was thinking, I believe Toshi does remaps to order, as in send him your specs and ecu and he sends it back tuned..

Which I would think is a less than perfect way to tune a car but..Surely if you gave him your previous tune data he could read it and mimic it so the tune should be close to spot on..

yeah as I said it would be a less than ideal way to do it..but say for instance you had a blown PFC and couldnt afford a new one..but you have your tune on file an old ecu laying around and remaps are only a few hundred bucks, it could just be enough to get you going again..

i think thats the only thing no longer available... got two perfect pfc's... but the main "chips" are no good :(

seriously its a easy job to fix. far easier than replacing your injectors.

What is the chip? I work in micro processor development and might be able to find an alternative that uses the same protocol and mapping for the memory.

edit: Or are you talking about the micro itself? not the memory?

Edited by Rolls

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...