Jump to content
SAU Community

Recommended Posts

as far as I understood before the rules changed J spec s15's could be imported because they where released in japan before we got them. so if they where released in japan in 98 and in Oz in 2000 you could import those 98 and 99 models. Also you could import the subaru sb/t forresters while we had the GT forrster.

Link to comment
https://www.sau.com.au/forums/topic/37238-importing-cars/#findComment-746127
Share on other sites

R33man - he was telling the truth if you think a 15 year old car is near new.. HAHA.. god im sick of these wankers that think they know everything about cars..

had my friend try and tell me you couldnt go on a drag strip unless you had more than 500kw.. :s

Yeh this guy has a bit of a rep for not being the brightest light in the sky.

Considering you can't get a 15 year old WRX :slap:

As for the 500kw rule. That made my nite :)

Link to comment
https://www.sau.com.au/forums/topic/37238-importing-cars/#findComment-746865
Share on other sites

no point arguing when you speak to people like this... there was a thread dedicated to this kinda thing in the wasteland...

same guy also told me on friday night that the Cayenne (sp?) turbo version was 500kg heavier than the non turbo.. i still havent checked this.. but it must be one big ****ing turbo if hes correct... may go double check now.. print it out too so i can properly rub it in his face :)

Link to comment
https://www.sau.com.au/forums/topic/37238-importing-cars/#findComment-746904
Share on other sites

Dunno if I should post this here but a guy told me that he pulled the water pump off his ride on lawn mower and turned it into a turbo. Said lawnmower can now do wheel stands in 4th gear at 120 km/h!

left the blades on too cos he still uses it to cut the grass.

Link to comment
https://www.sau.com.au/forums/topic/37238-importing-cars/#findComment-747359
Share on other sites

WRX - no, not for street use. Unless it is a personal import owned by someone who lived overseas (for example, in japan) for 12 months. You could definitely get an early model and register it in australia for well under $15k (under those regs)

MX5 - yes, if it's an 89 it can be brought in using the 15yr rule (or any year - using the aforementioned personal import regs). Again, you could land one and rego it for well under $10k. For example - last year I owned a 90 mx5 and I bought it for around 250,000yen (= around A$3k). That's a dealership price - you could go even lower at auction, and for a lower quality car.

Goon: the JDM mx5 (earliest version) has around 10kw over the australian version. I believe this is due to ignition timing (a common mod anyway). I loved the mx5 - f@cking amazing little cars with sublime handling - nowhere near enough power though - and as such, I don't regret trading it in for my current rx7

Link to comment
https://www.sau.com.au/forums/topic/37238-importing-cars/#findComment-747576
Share on other sites

as far as I understood before the rules changed J spec s15's could be imported because they where released in japan before we got them.  so if they where released in japan in 98 and in Oz in 2000 you could import those 98 and 99 models.  Also you could import the subaru sb/t forresters while we had the GT forrster.

:werd:

this was the case under the old import scheme, they could be approved if there was a gap between release in jp and release here.

The list of cars available under the new system is here:

http://rvcs-prodweb.dot.gov.au/sevs/sevsindex.htm

However, even if they are on this list a registered workshop needs to obtain approval to import them. The list of workshops and what they are approved for is here:

http://raws.dotars.gov.au/rawswebpublic/RA...AWPubSearch.asp

Link to comment
https://www.sau.com.au/forums/topic/37238-importing-cars/#findComment-748809
Share on other sites

Hi, this is my first thread and may i say its a fine site to be part of. For what it is worth the new raws system is now in place and it is almost impossible to import your own wheels unless you trust the workshop and your man overseas. You are at the mercy of both. Saying that, I have had no problems with raws workshops in vic or qld. Remember also that roll on, roll off freight is booked out. eg kiwi freight. The 3 or 4 ships are booked with toyota etc. for the next few months. Yes, cars were cheap and 1 can give you a mx-5 for 5k but it cannot be reg. My next Nissan is coming crammed in a container which is expensive. There are still some cheap mx5s, nsx etc if you are willing to wait a few months for the 15 years and get exemption from dotars but i would not hold my breath as i have heard all they want to do is make it too hard and costly for anyone to bring them in unless it is worthwile (r34gtr etc). (If i im wrong about something shoot me)

Link to comment
https://www.sau.com.au/forums/topic/37238-importing-cars/#findComment-749513
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...