Jump to content
SAU Community

Recommended Posts

+1 to rocker cover gaskets, mine leaked when I bought it as well.

Owned for 2 years like that & had no problems (didn't really know much about cars at the time & was a noob), I finally got them changed & had no more oil stains around that area again.

you will also find that on a lot of r33s they also chose the optional leaking power steering reservoir as well.

Mine had the optional PS leak.

Do they actually leaking from the hoses themselves or the joints? When I took my air intake snorkel thing out I noticed a fair bit of PS fluid had dripped onto of my A/C compressor. I tightened the bolts up & it seem to have stopped it, however the PS hose & where it joints to other parts of the engine is still oily.

yeah that is just the factory optioned leaking rocker cover seals. easy fix. you will also find that on a lot of r33s they also chose the optional leaking power steering resevoir as well.

Lol, you read my mind word for word

lol yup. both of these. my PS is leaky yet, but i am getting a bit of that build up at the back. replace the seals its not too hard. dont just tighten the screws, it may look like it helped....but most of the time just makes the leak worse.

  • 1 month later...

I got a defect fine for $80 from a highway patrol for that rocker cover oil leak I had blink.gif easy job swapping gaskets over though no biggie

I have slight leaks from PS resv. as well, got lazy and just tightend up screws a bit and it has definately slowed leak down lmao.

Edited by OoskylineoO

Both my R33's had the same shit going on. Only the teeniest bit of oil ever came out, I just couldn't justify fixing it lol. Also both my skylines have the leaking resevoir. I have NO f**king idea where the fluid is going but its on the hose and its dripping. No matter what I tighten up it doesn't stop.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. This is just my curiosity because iam sure the tuner figure something out...but either way i want to ask. The "problem" is that the Nistune ECU (Stagea FW and RB25DET NEO from Stagea) sees many times the speed than the speedo does(he says the speedo show 120 km/h - correct speed and the ECU shows like 510km/h ) I told him that this car/tranny getting speed from rear diff. If iam not mistaken the RB25DET NEO "need" to see tranny speed sensor? (my tranny has the plug for it). So couple of "question" If he connects/wire the speed sensor to the tranny...are the signals gonna intervene and if...what if he disconnects the rear diff one and the speedo stops working? Or the "new" sensor from the tranny "take over" and will not going need the one from diff? As i said i know he figure/get that done...iam just curious to know what are the solutions 🙂 
    • Your IACV is set to idle too low. You need to adjust it via the screw Duncan mentioned. From memory it should be 650rpm with the valve electrics unplugged. What is it trying to idle at with the IACV plugged in?
    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
×
×
  • Create New...