Jump to content
SAU Community

Want My Front Flushed And My Rear Poked

erik
 Share

Recommended Posts

erik Community Regular

erik

Posted
Posted

Before some pretentious ass tells me to buy rims that fit with the right offest, they're sweet jap rims at a good price and unfortunately i don't earn enough to buy new.

Anyway I'm getting some rims for my skyline, want some pro fitment for it and they are;

Front 17x8 +40 215/40 would like them flush

Rear 17x9 +40 215/40 want them sitting out of the guards a bit

Cheers mate

SargeRX8 Grand Master

SargeRX8

Posted
Posted (edited)

Ive got +40 up front on my R33 GTST with 235 tyres and a 5mm spacer. They do NOT sit flush and there really is not more thread to hold onto.

I don't trust those bolt on spacers. Id get longer studs fitted and a proper spacer made to suit your car.

I can't stand running spacers. I hate it, I don't trust it but unfortunately I don't have the $ to get wheels to fit so I just left them on the car.

I know you said it in your first line but honestly man just wait for the right set of wheel to show up. You can get defected for running spacers and depending how big they are you aren't going to have much thread to grab onto.

Edited by SargeRX8
SargeRX8 Grand Master

SargeRX8

Posted
Posted

how far in do they sit? i'm getting bolt on spacers

Far enough in you can't see them at all when looking from the ass end of the car.

30mm spacer lol. I've got 5mm(pass brakes by 2mm) and I'm hating it. I get what, 5 turns onto the lug.

Daleo Grand Master

Daleo

Posted
Posted

Far enough in you can't see them at all when looking from the ass end of the car.

30mm spacer lol. I've got 5mm(pass brakes by 2mm) and I'm hating it. I get what, 5 turns onto the lug.

The spacers he'd be looking at, would have studs in them and nuts to bolt them on to the cars hub. Spidertrax_whs_011.jpg

You don't want massive long studs with 30mm slip on style spacers; it's too much load on the studs, flexing them. 10-15mm slip ons would be about the maximum IMO. A bolt on spacer is a much better alternative; but only hubcentric ones.

Sarge; Not looking to insult or offend you; but 5 threads is nowhere near enough to hold a wheel on; you'll just pull the thread out of the nuts, and chuck a wheel.

As a fitter, I have always used 1.5 times the diameter of the thread as an acceptable amount of thread engagement. So on a M12 x 1.25 wheel stud; 18mm is optimum. At least aim for 12-15mm.

Please go to Repco and buy yourself some longer wheel studs before something terrible happens. It'll cost you $60 and an afternoon on the driveway.

Taleb Tyres Proficient

Taleb Tyres

Posted
Posted

25mm front 30mm rear bolt on spacers, you should be able to find a set of ford Pre AU to AU adapters on the cheap as theyre very common.

having said that, im running 19x10 in a +22, with an additional 35mm bolt on to get the look i want on the rear, with offset less is definitely more ;)

alr33x Grand Master

alr33x

Posted
Posted

Before some pretentious ass tells me to buy rims that fit with the right offest, they're sweet jap rims at a good price and unfortunately i don't earn enough to buy new.

Anyway I'm getting some rims for my skyline, want some pro fitment for it and they are;

Front 17x8 +40 215/40 would like them flush

Rear 17x9 +40 215/40 want them sitting out of the guards a bit

Cheers mate

it will never happen dont bother.

Minimum tyre width for 9in is 235.

based on what ?

for the front to sit "close" to flush you'll need about 30mm spacers

dont encourage such stupid ideas billy!

bloke needs to save up and buy decent size wheels they are freakin honda spec rims.

t4t4nk4 Explorer

t4t4nk4

Posted
Posted

Minimum tyre width for 9in is 235.

im running 225 on my 9 inch. and it looks fat.

and you only need 20 or 25 to sit fluch as ive got 25 and they sit abit past the guards, i have also just ordered 55mm :D

just make sure you roll the guards well so no scrubbage occurs.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • bilbo117
      Gtr-registry.com: Now All R32/r33/r34 Gtr Details - Full Registry - Submit Photos/info

      By bilbo117 · Posted

      Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...