Jump to content
SAU Community

Recommended Posts

Hi all

I know this topic has been covered but after much searching and reading I still have a question for those in the know:

Are the good quality silicon intake pipes (UAS, JJR, Samco) any good in high boost/horsepower applcations (i.e. do they suck shut)?

I'm looking at these because getting a custom intake made seems expensive, sleeving the stock one is only half a fix and the only alloy ones around (Performance-Wise) don't seem to be a very good fit (I have an alloy CAI and need the pod to sit exactly where it does now).

Failing this does anyone know where I can get a decent, factory-fit, alloy induction pipe?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/372995-rb25det-induction-pipe/
Share on other sites

I had an alloy one custom made by ScottyNM35 (he's done a few for other members also). I'm not sure if I'd trust the silicone ones for high power applications. Cost more than the other options getting about, but well worth it in my opinion. Bolts up to factory airbox no dramas

There are a couple of DIY's on sau where some steel piping is inserted inside the stock [rubber] intake. A decent cheap and quick fix for 'x' power.

sleeving the stock one is only half a fix

...

My advice would be to splash out on a custom stainless one. I did and I believe it to be money well spent. Custom will always fit your car perfectly. And the sound it makes... Oh the sound :wub:

@star33 - As you say "cheap quick fix" but not good enough from what I've read (see Hypergear thread) as they still restrict airflow at high power levels and I am looking for 250+rwkw

@Hekt1k - Thanks mate I have pinged ScottyNM35

@Honaldo - This may end up being the only viable option... How much did it cost you and where did you get it done?

I've had a fair bit of metal custom fabrication work done by Scott (Scottynm35) and I have to agree with Hekt1k, it's an excellent way to go.

I've been very happy with the work Scott has done for me and I'd definetly reccommend going the metal intake pipe with Scott :thumbsup:

If you are in Sydney, Fairfield exhaust shop will do custom intake pipes for $80 - $120 a piece. Really good price but I ended up making my own piece of shit. I wouldn't mind getting something proper made. I designed my metal pipe around the pod filter, and z32 and enclosure. I should have made a pipe bigger, all metal and then remade a box to suit. Silly me.

Thanks for the feedback guys - I am going to go down the fabrication path

The general concensus seems to be that the silicon pipes are not the ideal solution.

I'm getting some work done at Sabbadin soon and I was in there yesterday looking at there fabrication work which is superb!

I may as well get it all done at once...

Thanks for the feedback guys - I am going to go down the fabrication path

The general concensus seems to be that the silicon pipes are not the ideal solution.

I'm getting some work done at Sabbadin soon and I was in there yesterday looking at there fabrication work which is superb!

I may as well get it all done at once...

Good choice, you won't regret it :thumbsup:

Looks hot, sounds awesome, and most importantly you know it is going to do the job you want it to do. Just make sure you get at least 3"! lol.

Thanks for the feedback guys - I am going to go down the fabrication path

The general concensus seems to be that the silicon pipes are not the ideal solution.

I'm getting some work done at Sabbadin soon and I was in there yesterday looking at there fabrication work which is superb!

I may as well get it all done at once...

Good work, I've actually asked Rob as well on a quote to do that stuff, I'll be popping around Sabbadin today maybe he can do a group discount lol

Hey could you PM me some contact details for this guy? I have some custom pipework needs in a couple of months time. Does he do custom stainless exhaust parts too?

Mine was $250, was made by Kermit. Dunno if you've heard of him over there, but in the west he's the man you speak to when you need any fabrication work done :D

You can do it with a 3" 45deg bend, a straight length of 3" pipe (couple of hundred mm long), 2x 3" straight silicon joiners & 1x 2.5"-3" silicon reducer.

Mine is welded but you could just use a silicon joiner to join the bend and straight bit. It is currently off getting a 2" bov return welded to it but when it comes back I'll take some pics :thumbsup:

There definately seems to be a big gap in market here for someone to exploit (I am unfortunately not that talented!)

Someone could make a killing if they could fabricate these in numbers for a decent price!

Good work, I've actually asked Rob as well on a quote to do that stuff, I'll be popping around Sabbadin today maybe he can do a group discount lol

I have made a few for local guys that can drop in with their car, but every one of them was different. (pod, bov return, turbo intake size/position.) Makes it very hard to mass produce and make on the cheap unfortunately.

Its the fiddly bits like bov return, breather etc that take the time to get right, the steel bov piping also needs to be modified to align with the intake fitting.

I have made a few for local guys that can drop in with their car, but every one of them was different. (pod, bov return, turbo intake size/position.) Makes it very hard to mass produce and make on the cheap unfortunately.

Its the fiddly bits like bov return, breather etc that take the time to get right, the steel bov piping also needs to be modified to align with the intake fitting.

To compensate for this, I am using some fat heater hose suitable for about 45psi, to return the BOV output. It seemed way too fiddly to get metal to metal fittings to line up. I would pay though to have a proper all metal intake pipe made.

As luck would have it I've managed to score myself an Apexi super suction intake pipe

A very nice piece of kit in cast alloy... nobody could fabricate anything of this much beauty out of exhaust pipe :P

Can't wait to hear the GT-RS sucking through this puppy!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...