Jump to content
SAU Community

Recommended Posts

How about any time your standard AFM maxxes out? Which is about (or a bit more than) 300 engine HP. You can go past the AFM max out point, but if you want to retain the ability to control the mapping, it's worth upgrading.

this, although its more like 300rwhp (varies from car to car obviously) than 300bhp

Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5950382
Share on other sites

Thanks guys,

actually I am not sure what sticker is even on mine. might have to duck outside and have a gander.

Anyway i was aiming around the 250-280rwkw with Hyypergears ATR43 SS1.5 so i guess i will need one. Just out of interest are the the same physical specs as a stock gtst one as in would the mounting holes match up to the standard airbox. I need everything to look as much as standard as possible....

Ps: I forgot to ask, has anyone seen the aftermaket z32's on ebay (brand new)? any thoughts...

for example.......

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=110559548059&ssPageName=STRK:MEWAX:IT

Regards,

Dazza

Edited by itshimdazza
Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5950440
Share on other sites

hello

ECR33 AFM is 80mm and maxes around 220rwkw ish, some can do more, some less, but they all peak 5v around this level

VG30 AFM (or Z32 we call it) is 80mm and maxes around 400rwkw ish, some can do more, some less, but they all peak 5v around this level

both are a direct swap for the physical diameter and adapters but the wiring is different

ECR33 S2 is pink label 3 wire and VG30 is orange label 4 wire (extra ground wire)

Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5950453
Share on other sites

there are also Z32 (really VG30 AFM's) fake on ebay so do not BUY fake ones

a legit Z32 brand new costs $350 ball park and comes in an orange BOSCH box

look at the pics of this page for a fake Z32

http://paulr33.com/techinfo/snipit.html

also Ive never seen "green" plastic based Z32s like that EBAY url you posted, they are knock offs or fakes or copies or shitters

Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5950454
Share on other sites

cheers Paul, thanks for the heads up...

I often wonder about ebay copies and I would love to know what the green maxes out on though. would be an interested experiment

has any members bought something like this "a fake" and got some real testing from it like what was on Pauls URL above with maxe rekw & voltages?

Dazza

Edited by itshimdazza
Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5950500
Share on other sites

That specific ebay one isnt a Z32...

It's a dead give away with how the ad is worded. Notice how it says "aftermarket Z32", as in - not original. No where does he say it is OEM/Genuine etc. The last line of his ad says "check other listing for genuine"

That's so he can cover his ass when you realise you've purchased a paper weight :)

His genuine ones are selling for $320 or there abouts.

Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5950507
Share on other sites

that link states its an aftermarket replacement and to check his other listings for genuine stuff so theres nothing dodgy going on there.

alot of the older fake z32s worked fine in every way, they just maxxed out at much lower power levels than genuine ones.

if you end up getting one a cheap solution for the plug is to get a rb30 afm plug as they're the same.

Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5950517
Share on other sites

Pfff do not be telling people that fake Z32 AFMs are any good. They are not.

We are talking about a extremely sensitive and critical component of the fuel system here... "she'll be right" doesn't cut it!

It's not just about "peak power" there are many other factors at play here not least of which is consistency & reliability

Of course if it's just for your fully sik drift car with lots of go-fast stickers on the side then go for it! :D

that link states its an aftermarket replacement and to check his other listings for genuine stuff so theres nothing dodgy going on there.

alot of the older fake z32s worked fine in every way, they just maxxed out at much lower power levels than genuine ones.

if you end up getting one a cheap solution for the plug is to get a rb30 afm plug as they're the same.

Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5951085
Share on other sites

agree the AFM is not something that should be mucked around with

its one of the key sensors the engine uses for engine management

why do you think it rev caps at 2500rpm as a failsafe when the AFM is mangled, failed or unplugged

cos its not safe to run with a mangled one or non-working one

Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5951234
Share on other sites

Chinese copy Z32 AFMs are an absolute pain. They don't measure anything like the genuine item and will cost more in tuning time than what its worth

Nistune Z32 AFM forums link

Declan from Garage 7 shows on his website the internal differences of the Z32 AFM copy and changes in mapping here

Garage 7 link

Link to comment
https://www.sau.com.au/forums/topic/372996-z32/#findComment-5952453
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
    • The old approach was to fill the cylinder/chamber with a length of rope pushed in through the sparkplug hole. The new approach is to connect compressed air to the sparkplug hole and fill it with enough pressure to push the valves up. Doing either of these things with the head on and the engine in the car is a lot less pleasant than doing it properly.
    • Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
×
×
  • Create New...