Jump to content
SAU Community

Recommended Posts

I got around to cleaning my car and taking a couple of pics.

The rear muffler is the Nissan sport one with the switch on the dash. All week I had been trying to pick the difference and couldn't, I could here the electric motor when I flicked the switch but that was it. Turned out the butter fly was seized so that is all fixed now.

I also removed the front section of the air box just to see how it sounded.

IMG_1133.jpg

IMG_1132.jpg

IMG_1129-1.jpg

IMG_1131-1.jpg

IMG_1134.jpg

When I took it for a drive after that with heavy braking for 100kph there is quite a bit of shuddering but im sure if I get the disks machined and new pads this should be ok. What also happened twice after flooring it to 100kph and then slowing to a stop was the engine stalled, Any ideas what could cause this?

Also dose anyone know what this is?

IMG_1139.jpg

Link to comment
https://www.sau.com.au/forums/topic/373305-dasic1-m35/
Share on other sites

It sounds like the throttle body needs a clean if you are stalling, then a throttle learn procedure.

Save for some r32/r33 gtr front brakes, the stock ones are just too thin for such a heavy wagon, don't waste you money on trying to fix the single pot setup.

ETC toll device by the looks of it, bin time.

Link to comment
https://www.sau.com.au/forums/topic/373305-dasic1-m35/#findComment-5954093
Share on other sites

Thanks

Im not sure what the wheels are there just the ones that were on it. There not what I would go buy but they will do for now.

Ill have a look at the throttle body next weekend, I dont normally drive that way so not a real problem.

Ive been have a bit of a look around and looks like the skyline calipers will be the way to go, I dont need anything to special. Do they have to be the GTR ones, how hard are they to come across?

Link to comment
https://www.sau.com.au/forums/topic/373305-dasic1-m35/#findComment-5954341
Share on other sites

I was I initially going for r34 brakes but ended up with r33. Still a good cheap upgrade. I think these will be more than good enough for an m35 as 95% of them will only see street duty rather than the track.

$300 for a front brake upgrade is pretty good value to me!

Link to comment
https://www.sau.com.au/forums/topic/373305-dasic1-m35/#findComment-5955652
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...