Jump to content
SAU Community

Recommended Posts

Heya all,

Seeing as most of Australia has now become rain drenched, driving on wet roads is almost a daily event. Ive noticed in recent months my R34 loves to aquaplane at the slightest (smallest) build up of water on the road.

Last night on the freeway at 110 or a lil less the car constantly tried going sideways again in the rain (mostly higher freeway speeds it always happens but it can happen at just 60ks too)..... finally its made me ask the question;

Does anyone have any advice on how to reduce aquaplaning in a car, mebbie specific to Skylines or is it an R34 thing? Or aquaplaning in general. I used to try to 're steer' (if that makes sense) when the car takes off in the front end, but that makes it worse i find, now i dont touch the steering wheel as the car aquaplanes and i find it grabs traction again and self corrects but its a bit freaky..... There has to be a better way to reduce the effects of aquaplaning.... surely ? How do racing cars do it? I recently saw a porsche that crashed on the news after it aquaplaned killing the two people inside. I know ive come close to all loss of control too. Any Advice is welcome. Thanks in advance.

Edited by nathanau
Link to comment
https://www.sau.com.au/forums/topic/373335-aquaplaning/
Share on other sites

Heya check tyres for what ? besides the obvious poor tread ( mine r in excellent condition)

What type of tyres you got?

Will help if you got a set of tyres that have good wet weather rating...

Hard and Soft tyres (as in rubber type) can make a difference too.

Link to comment
https://www.sau.com.au/forums/topic/373335-aquaplaning/#findComment-5954905
Share on other sites

run tyre pressures UP 10 + lbs more then than normal

That's going a bit overboard. 2-3 psi would be more than enough.

Make sure you have enough tread on the tyres will obviously help - aids in dispersing the water from under the tyre.

Can't recall ever having a problem with aquaplaning (R32), running both Bridgestone Potenza and various Falken tyres. The crap Maxxiss on my Falcon are another thing all together.

Link to comment
https://www.sau.com.au/forums/topic/373335-aquaplaning/#findComment-5956123
Share on other sites

tyre compound plays as big a part as tread depth, and tread pattern plays a big part too, especially if you have directional tyres and have rotated them yourself and put them on the wrong side. size also plays a big part. if you have wide tyres then they will aquaplane more than skinnier tyres.

and +1 for altering tyre pressure.

having said all of that, i've had some pretty shitty, almost bald tyres on cars before and never had any issues with aquaplaning. had a few moments where it's been close in absolutely pissing down rain though. maybe it has something to do with driving style as well.

oh and you don't use tyre shine by any chance do you? if you do, do you put any on the tread of the tyre? cause that's a big no no.

Link to comment
https://www.sau.com.au/forums/topic/373335-aquaplaning/#findComment-5956140
Share on other sites

Damn, everything I wanted to say was mentioned lol.

But I have to reinforce, if you're not in complete control of the car, slow it down. It's just not worth it if things go wrong. Bad tyres, poor tread, low pressures, all make a pretty big difference. But there's nothing more important than driving to the conditions.

Link to comment
https://www.sau.com.au/forums/topic/373335-aquaplaning/#findComment-5958286
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...