Jump to content
SAU Community

Recommended Posts

Hi everyone,

i rotated my tyres yesterday and found that my front cv shaft boots are split on both sides. after research and a few phone calls this is what i found out:

Pedders Suspension:

replace both drive shafts and boots: $600.00 (labour included)

Just Jap:

selling refurbish drive shafts with new boots: $600.00 (postage and labour NOT included)

Well known work shop:

replace boots only: $600.00 (if need new drive shaft will cost even more)

Question: has anyone got things done from Pedders? whats their rep like and are their parts any good?

What do you experts reckon i should do? just get boots done and hope that shafts are ok, or get shafts done at the same time while everything is out?

post-43204-0-94129900-1313118245_thumb.jpg

post-43204-0-88068900-1313118253_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/373793-boots/
Share on other sites

  • 2 weeks later...

Depends if they are using the crappy universal fit boots like a workshop I was taking mine to were, they lasted less than 12 months each time. Got it done twice. So I pulled the front shafts out and took them to a C.V workshop here is Brisbane and paid $150ea shaft to have the completely rebuilt with new joints, boots etc....have been great ever since. If the boots haven't been split long and haven't lost a lot of grease and gotten a heap of shit in there you might be ok to just get new boots put on. But stuff the $600 just for boots to be replaced. But that price for refurbished shafts installed isn't too bad. As long as they are descent shafts that haven't had crappy chinese joints or rebuilt cv joints used.

Link to comment
https://www.sau.com.au/forums/topic/373793-boots/#findComment-5982040
Share on other sites

The suspension chain whose name starts with a P is a swear word where I come from. So I would recommend taking your car to the zoo and getting the chimpanzees to work on it before I'd suggest you take it to them.

Do as suggested above. Take them out yourself. Take them to a reputable CV/Driveshaft business (if you were in Adelaide I could point you at a couple) and get them rebuilt properly at a sensible price. Then take home and refit. Easy.

Link to comment
https://www.sau.com.au/forums/topic/373793-boots/#findComment-5982191
Share on other sites

The suspension chain whose name starts with a P is a swear word where I come from. So I would recommend taking your car to the zoo and getting the chimpanzees to work on it before I'd suggest you take it to them.

Do as suggested above. Take them out yourself. Take them to a reputable CV/Driveshaft business (if you were in Adelaide I could point you at a couple) and get them rebuilt properly at a sensible price. Then take home and refit. Easy.

honestly i think the chimpanzees would be a better mechanic than me, when it comes to stuff like this i have no idea. only thing i can do myself is a minor service plus no tools to even do jobs like this. ended up sourceing new shafts myself and had those fitted by a trusted mechanic.

Link to comment
https://www.sau.com.au/forums/topic/373793-boots/#findComment-5985485
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...