Jump to content
SAU Community

Recommended Posts

Pretty much, the boot was leaking at both the left and right sides, so I took the time, spent the money and resealed the rear lights even going so far as to use the Nissan sealant at surprising expense.

Well, it rained again, and the boot still gets water leaking in it. Its not coming from the lights, but I suspect its leaking in through the seal of the rear quater panel and the lip of the boot at the top: around that area.

So, has anyone else had a similar problem?

What was it?

How did you fix it?

thanks

I have the same type of problem with one of my R33's.

The boot leaks on one side at a time and fills one tail light. It is an intermittent problem that I cannot replicate by hosing the car and the tail lights have been out and resealed. Depending on which way the car is parked the water gets into the lower tail light,

The car has a factory GTR bootlid and spoiler and I am starting to think that it is leaking through the spoiler mounting bolt holes.

Any ideas or suggestions on what to try next would be appreciated. :thanks:

My R33 leaked on the left side from the top, inside the gutter the boot closes over.

It soaked one of my amps hence I could determine the position of the leak.

It appeared to come through the bolt which fastens the hinge for the boot.

The bolts just go through the base of the gutter with no rubber washers or sealant.

My car was in a prang years ago, maybe the panel beater missed it.

Lucky for me my car is black, so I used black Sikaflex and just neatly smeared over the hinge mounts and bolt heads.

Also when this leak happened, my car was facing down hill, which makes the gutter fill up.

So far so good.

  • 2 months later...

update, its wasnt the weathering strip, or not that i could tell. I tested the boot by pouring water over various parts of it repeatedly, and foud water entering from 4 + parts, including some seams of metal panles. I puit leftover sealent stuff there, but annoyingly there are still decent leaks which somehow let water get in on the L and R sides of the boot. Dispite all my testing, i have noidea how the funk this gets in the boot, its crazy.

Currently im fed up and have given up, and with the weather getting cold over here, i dont know when i will get to attempt to check more stuff. Im wondering weather the boot rubber seal is somehow letting it it, but thats just a last ditch guess.

this sucks

get some baby powder (or similar) and sprinkle it up and around the in side of the boot,when it next rains you will soon be able to determine where the water is coming in, had the same problem with my 300C, it had been rear ended at some stage in its life and the boot hinges were slightly buckled to the point where the boot lid wasnt sitting on its seal allowing water to enter

get some baby powder (or similar) and sprinkle it up and around the in side of the boot,when it next rains you will soon be able to determine where the water is coming in, had the same problem with my 300C, it had been rear ended at some stage in its life and the boot hinges were slightly buckled to the point where the boot lid wasnt sitting on its seal allowing water to enter

Short of locking your G/F in there and taking the car through the automated car wash, the above advice is good!

Short of locking your G/F in there and taking the car through the automated car wash, the above advice is good!

tempting to lock the GF in the boot right now anyway. . .crazy b@#ch

Mines leaking in the same manner and I traced it to the boot gutter where it looks like the seals are cracking. Am pretty sure it is not the boot bolts, and hinges as the leaks come from before that, and it is not the rear glass either. I like the baby powder idea so I will give it a wack. Weather has been nasty so I can't get it done, will use clear enamel paint in several layers until I can get it properly fixed.

My 4 door was leaking, resealed the tailights, still leaking. Replaced the bootlid with spoiler with a spoilerless one, problem solved. Looked like it was coming in through the spoiler holes. The rubber gaskets were pretty dried out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...