Jump to content
SAU Community

Recommended Posts

Hey zoom appreciated hearing your experience with the GTX mate sounds like its a good thing cant wait till next week to get my car back and see how hard it pulls.

Sounds like your car spins wheels a hell of a lot haha just wondering what kind of diff and suspension mods u might have? Have u had and boost control issues with the smaller actuator?

No diff work just the suspension, just as whiteline swaybars, whiteline pineapple kit, camber upper bushes front and rear, tein super street (setting at 345mm front arch to wheel center). The rear camber i set to -0.5degree and toe in 1mm to give me more traction, while the front -2degree with 2mm toe in and maximum castor.

Never had any problem with the garrett 1 bar actuator. my old hks ecv3 seems to hold the boost pretty steady to redline, may drop like 1psi. It seem like come on boost reasonably quick.

previously when i installed the pomcams while with the gcg highflow, i have gained 400-500rpm. I don't know if the big actuator can actually bring the boost on earlier.

Got my car back yesterday unfortunately i didnt get a dyno sheet because ive got a boost control issue that i need to sort out and ive also got an idling issue :rant: so the tune isnt finished yet

Yuvaz said i made 270kw @ 20psi which was a lil disappointing number wise BUT it feels unreal pulls like a freight train is very responsive and the sound is amazing!

Does anybody know where i could get my hands on some English instructions on how to setup a HKS EVC boost controller?

Haha nice!:rolleyes: 320kw its a big juicey number but how long is a unopened rb25 gunna last with that kinda power? I have heard that the 250-270kw zone is the safe power limit? (so to speak)

mate some are good some dont last long..... i am from a drifting background so u can understand how we treat rb25s...(badly)

some of the racing guys have been making 550hp atw with unopened RB25, e42, gt35r, plennum and cams for 2 seasons... and i know of a couple rbs that have been making 450hp on pump fuel for 4 years....

its only like $1500 for a new one every 4 years.... but its a fun 4 years

Got my car back yesterday unfortunately i didnt get a dyno sheet because ive got a boost control issue that i need to sort out and ive also got an idling issue :rant: so the tune isnt finished yet

Yuvaz said i made 270kw @ 20psi which was a lil disappointing number wise BUT it feels unreal pulls like a freight train is very responsive and the sound is amazing!

Does anybody know where i could get my hands on some English instructions on how to setup a HKS EVC boost controller?

Thats not a bad number at all Micko. Remember its just a number.

What is the idling issue? Is it mixture related? Remember it was playing games with us when i did the quick road tune

Hello miss sexy :P yeah the number doesnt mean a thing when the right foot goes down mate cos its a beast now haha! I didnt have the rocker cover breather plumbed into the suction line so its probably sucking air from there so thats something i gotta do this weekend to try sorting that idle out & so the process of elimination begins :blush:

It feels really good considering its not tuned properly Yavuz said hes got some holes to fill down low in the tune yet but once ive got the boost controller sorted

i set the controller to 15psi and i get around 19 or 20psi boost :spank: and that breather line hooked up it should be an hour on the rollers away from the tune being finished properly :banana:

Thats not a bad number at all Micko. Remember its just a number.

What is the idling issue? Is it mixture related? Remember it was playing games with us when i did the quick road tune

mate some are good some dont last long..... i am from a drifting background so u can understand how we treat rb25s...(badly)

some of the racing guys have been making 550hp atw with unopened RB25, e42, gt35r, plennum and cams for 2 seasons... and i know of a couple rbs that have been making 450hp on pump fuel for 4 years....

its only like $1500 for a new one every 4 years.... but its a fun 4 years

Well ive had a few days of fun at this stage lol and im nowhere near those numbers so hopefully it will be 1 of those good ones that hangs in there for a while!:whistling:

Thats unreal 550rwhp on a stock motor thats awesome!

Testimate to how good nissans little RB's are!:worship:

Haha Andy exactly! Who cares if you got a car that drives like a million bucks on and off boost and puts the power to the ground nicely????

Its all bout the number isnt it?:blink: HAHA!

You can't dick schwiiing unless you have a bigger number Mick.

Who cares how it drives....sif that matters. :nyaanyaa:

Haha Andy exactly! Who cares if you got a car that drives like a million bucks on and off boost and puts the power to the ground nicely????

Its all bout the number isnt it?:blink: HAHA!

well its not much fun telling people you have a 4 inch dick,

even if you can use it...lol

Haha now that would be impressive! yeah should be interesting i think you need to jump behind the wheel of my car when u get the chance Andy

4" across the eye?

Hopefully we can overlay our dyno runs in about 2 weeks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...