Jump to content
SAU Community

Recommended Posts

Im working Saturday too but should be home around the 4 zone id say give us a buzz and hopefully our timing is good because im curious to see what u think having driven many turbo set ups

hmmm Saturday I am out your way....

Motor is completely stock no cams mate dont know bout anymore boost im running around 21psi now so i think its fairly high for a stock motor lol it did spike up to nearly 27psi for a little while before i noticed and backed off but it didnt ping or anything so should have plenty of fuel with my Tomei pump and 850cc PE's but it did spin my 255's in 3rd gear at bout 90kph haha it felt awesome!:teehee:

just want to compare to mine in regarding to the air flow rate. Are you intending to run higher boost? do you have cam?

Gday Harry :nyaanyaa: yeah it did fix it mate CHEERS! found some english instructions now so im bout to go have a play with the controller because its still running high for example its set at 15psi on the controller now but goes up to 19-20psi but its stable and not spiking like it used to so i think its to do with the boost offset settings or the likes but ill be back on soon when i have play and take her for a squirt :cheers:

Did gravity fix your EVC or what Mick?

You never got back to me with a full result :rolleyes:

Motor is completely stock no cams mate dont know bout anymore boost im running around 21psi now so i think its fairly high for a stock motor lol it did spike up to nearly 27psi for a little while before i noticed and backed off but it didnt ping or anything so should have plenty of fuel with my Tomei pump and 850cc PE's but it did spin my 255's in 3rd gear at bout 90kph haha it felt awesome!:teehee:

with cams it will bring your boost on earlier and give you atleast 10kw everywhere. Yeah, i've been running 20psi with gcg for the last 5 years and now with the gtx i'm running 23psi on the stocker. Finger cross! lucky i don't drive alot. Maybe 255-275 semi slick time for you!! :thumbsup:

So what is your rpm when you hit 20psi?

Haha yeah i dont drive mine much either ive had my car for 12 months now and done about 2500-3000kms. In second gear its bout 4000rpm and it really starts to haul ass all the way to 7500rpm 3rd is probably around 3700rpm maybe slightly less :whistling: been seriously thinking about poncams to help with lag because after being used to the 200kw and stock turbo response the lag was really noticable even though it drove much nicer off boost though i must say! But when it comes on now my smile is probably 2 inches wider now its simply alot of fun to drive now. :banana: So if i could get it boosting earlier it wouldnt really be that far off stock response that would be UNREAL!

Believe it or not my car doesnt really spin wheels mate even in 1st gear when you put your foot down! it just hooks up its awesome! When my boost controller settings are sweet ill probably put 25psi into her briefly and see how that feels or get an E85 tune which i initially was gunna do :thumbsup: i love it!

with cams it will bring your boost on earlier and give you atleast 10kw everywhere. Yeah, i've been running 20psi with gcg for the last 5 years and now with the gtx i'm running 23psi on the stocker. Finger cross! lucky i don't drive alot. Maybe 255-275 semi slick time for you!! :thumbsup:

So what is your rpm when you hit 20psi?

it did spin my 255's in 3rd gear at bout 90kph haha it felt awesome!:teehee:

Mate that is a sight better than what mine did the other night and ever since I put it down in 3rd. It slipped the clutch and smashed the limiter as soon as it came on boost in 3rd. Even driving from no boost to full boost it starts to slip.

You must be stoked with your car now, I know I am with mine (apart from the clutch) My grin is just like yours biggrin.gif

Thats bit of a bummer mate but once your clutch is sorted the fun will begin good luck with it!:thumbsup:

Yeah i am stoked with it but she only fried 3rd when my boost hit 26.6psi haha on 21psi it just sits down and boogies i love it!

My blitz gauge only goes to 1.5 bar and i watched the needle fly straight to the bump stop! the motor didnt make any noises it shouldnt but i backed off anyways lol!

The smile is what its all about mate and if your smile is like mine you are very much a happy man too :cheers:

Mate that is a sight better than what mine did the other night and ever since I put it down in 3rd. It slipped the clutch and smashed the limiter as soon as it came on boost in 3rd. Even driving from no boost to full boost it starts to slip.

You must be stoked with your car now, I know I am with mine (apart from the clutch) My grin is just like yours biggrin.gif

More lift + more duration = less gas velocity at low revs

So even if the actual RPM that max boost is reached is lower, the car will have less power off boost

Something that does help is VCT, don't think it brings on boost any earlier but gives it more off boost pull.

You could do something funky with retarding the ignition timing massively as that will get you boost in idle, but you'd want it switch controlled otherwise it will be horrible to drive and f**k you economy.

Edited by Rolls

Well i dont want it any doughier off boost so that rules cams out for me! It feels good the way it is and once my tune is finished it will be better!:merli:

More lift + more duration = less gas velocity at low revs

So even if the actual RPM that max boost is reached is lower, the car will have less power off boost

My car is a 97 33 so itd have vct yeah? I bought HKS cam gears and timing belt which arent installed is there any benefits to installing them apart from them looking pretty in my engine bay??pinch.gif

Something that does help is VCT, don't think it brings on boost any earlier but gives it more off boost pull.

You could do something funky with retarding the ignition timing massively as that will get you boost in idle, but you'd want it switch controlled otherwise it will be horrible to drive and f**k you economy.

Something that does help is VCT, don't think it brings on boost any earlier but gives it more off boost pull.

You could do something funky with retarding the ignition timing massively as that will get you boost in idle, but you'd want it switch controlled otherwise it will be horrible to drive and f**k you economy.

Its not as simple as doing this, you wont make boost on idle, the engine just isn't producing enough exhaust gas just sitting there. Rally cars that have anti-lag require a fair amount of revs and basically misfire certain cylinders and play with fuel and timing. It's not real great for the engine either I dont think but they throw a new engine at the car every rally

My car is a 97 33 so itd have vct yeah? I bought HKS cam gears and timing belt which arent installed is there any benefits to installing them apart from them looking pretty in my engine bay??pinch.gif

All R33 GTS-t's have VCT

I thought the anti lag set ups worked by basically pumping fuel into the exhaust manifold? I guess thats just probably 1 of the set ups they have played around with :blink:

Its not as simple as doing this, you wont make boost on idle, the engine just isn't producing enough exhaust gas just sitting there. Rally cars that have anti-lag require a fair amount of revs and basically misfire certain cylinders and play with fuel and timing. It's not real great for the engine either I dont think but they throw a new engine at the car every rally

All R33 GTS-t's have VCT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • From the factory on RB26s there's a fitting on the intake manifold collector/"plenum" that provides pre-throttle boost signal. That's how they did it back in the day, I figure it's fine to replicate it.
    • I would be surprised if that wasn't the issue. It's probably telling you, that even if you remove the plastic liner, you may have some other clearance issues that may occur too in some scenarios. IE, tyre to guard. It looks like someone has already rolled the lip, but you may still have issues in the future IE, turning and hitting a bump etc. The fact it changes how bad it makes the noise when you are going backward vs forward is highly indicative that it's the tyre rubbing. They do make a terrible sound, even if you're only pushing a project car that has a liner hanging down on a tyre!   Has the car been lowered? If it has been, what is the measurement from the centre of the wheel hub to the lip of the guard straight up?
    • Summernats cruiser?
    • Mark's a bit smarter than people give him credit... He'd convince the person that is to become dead, to drive him to the forest first. That way his car has no evidence in it, and he's free to dispose of their vehicle permanently how he sees fit too...
    • But if you had to go bury a body in the forest, would you not put that in the boot? Most of them are >=90kg these days.
×
×
  • Create New...