Jump to content
SAU Community

Recommended Posts

The thing I'm most interested in is where it starts building power etc, its clear that with >20psi and E85 its going to make good power - that was never the question. I'm more interested to see if its equal to or any better than a regular GT3076R in normal usage.

if i can get this footage to actually work it probably wont give you a good idea lithium as i was sitting on 4-4500 before i could give the accelerator a hit

The thing I'm most interested in is where it starts building power etc, its clear that with >20psi and E85 its going to make good power - that was never the question. I'm more interested to see if its equal to or any better than a regular GT3076R in normal usage.

The vid actually tells very little in general, looks quite laggy in 2nd gear (though you say its not necessarily full throttle?) and breaks loose a bit in 3rd. Seems like it must go ok though, take it to the strip and point a camera at the dash :D

Yeah prob not the best video lol yeah hit bit of a dip in the road in 3rd and it started to squeal i dont think it feels that laggy in 2nd tbh and yes i will hit the strip so i can do a decent in car video.

Just spoke to my tuner and the engine light popped on because i was about to hit the rev limiter and thats the links little warning telling you you are about to get cut so thats a relief :blush:

The thing I'm most interested in is where it starts building power etc, its clear that with >20psi and E85 its going to make good power - that was never the question. I'm more interested to see if its equal to or any better than a regular GT3076R in normal usage.

Yeah that's what i wondered... My tune will be E85 and probably 20psi with the 3037-56T but would be interesting to see how different it would be with the GTX3071r as a back to back comparison... Maybe one day i'll do it but for now ill concentrate on just getting my car to run >_<

What r u guys complaining about, it looks fast enough (4500rpms to limiter) for me to jizz in my pants, does look real fast, that zone. But I understand the first half of the rpm band was slow as cos he wasn't flooring it as above?:rolleyes:

Interesting. My link doesnt flash a warning when i hit the limiter. It does if you bash the MAP limit however :)

Maybe its a setting.

I think you should take a few more videos like that one.

Do this:

2nd from 2000rpm

3rd from 2000rpm

4th from 2000rpm

Quite keen to see the difference in real time recordings between the GT and the GTX

I have a video quite similar to that one you just posted. Dont know if Lithium or myself have already posted it? (Normal GT30)

Yeah cpouldnt floor it when i wanted cos there was a truck in front of me so had to let him pull a gap and a falcon coming the other way that looked like popo from a distance :whistling: so didnt step on it till 4500 really

What r u guys complaining about, it looks fast enough (4500rpms to limiter) for me to jizz in my pants, does look real fast, that zone. But I understand the first half of the rpm band was slow as cos he wasn't flooring it as above?:rolleyes:

My tuner told me that it will flash for 3 reasons nearly hitting the rev limiter, boost cut if it over boosts and temperature which is how mine is setup apparently.

I will do some more in car vids when i can actually get on it harder..... Hopefully this shitty weather pisses off it looks like its gunna storm out my way soon.

Interesting. My link doesnt flash a warning when i hit the limiter. It does if you bash the MAP limit however :)

Maybe its a setting.

I think you should take a few more videos like that one.

Do this:

2nd from 2000rpm

3rd from 2000rpm

4th from 2000rpm

Quite keen to see the difference in real time recordings between the GT and the GTX

I have a video quite similar to that one you just posted. Dont know if Lithium or myself have already posted it? (Normal GT30)

I ditched the boost gauge my profec is my boost gauge :whistling: but i will do my best to get some more footage as soon as possible as long as the weather holds out for me

Profec is good, because you can show a peak hold value!

So load up in 4th from 3000rpm with camera on tacho, then when you hit 1bar back off and show the profec peak reading!

For science :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...