Jump to content
SAU Community

Recommended Posts

just looked all over it and there is no numbers unfortunately :ermm:

so why dont these housings flow if they are supposedly bigger than the .63 but smaller than the .82 in theory wouldnt that be a good happy medium between power and response?????

Im lost :wacko:

Mick I went over this before you bought the turbo. ARR is a ratio. There is no meaningful way to compare a non-Garrett GT30 based turbine housing with a genuine Garrett housing.

It will probably top out earlier than a 0.63 if it is an AVO casting.

Hang on a minute I just found the post.

http://www.skylinesaustralia.com/forums/topic/375232-garrett-gtx3071r/page__view__findpost__p__5985575

Edited by wolverine

If you just ask the supplier to swap your housing for the garrett one and pay the additional you will be fine.

Honestly, we are pretty much telling you there is no point even trying that housing and seeing how it will go. You will just void its value.

The supplier wont take it back once its used and you will not be able to sell it.

I assume you got your turbo from MTQ, just call them and explain you have changed your mind about the rear housing and would like to exchange it as it is still new and unused. Im sure he will let you send the housing back undamaged and exchange it for the garrett .82 provided you pay the cost.

If your housing is worth $400 new, and the garrett $600, pay the additional $200 then pay to send it to him and send it back to you and your laughing. No more mucking about, just do it.

but will it still make good low down grunt with the .82 cos i dont wanna have to rev its tits off it to find some fun power?

Will the E85 help with boost response?

If you just ask the supplier to swap your housing for the garrett one and pay the additional you will be fine.

Honestly, we are pretty much telling you there is no point even trying that housing and seeing how it will go. You will just void its value.

The supplier wont take it back once its used and you will not be able to sell it.

I assume you got your turbo from MTQ, just call them and explain you have changed your mind about the rear housing and would like to exchange it as it is still new and unused. Im sure he will let you send the housing back undamaged and exchange it for the garrett .82 provided you pay the cost.

If your housing is worth $400 new, and the garrett $600, pay the additional $200 then pay to send it to him and send it back to you and your laughing. No more mucking about, just do it.

Mtq are in wetherill park which is nice and close but i bought this turbo through boostn imports so i wonder if i will still have to go through him again or whether mtq would let me deal direct??? plus id need it before next weekend hope its do-able!

Would this give me my happy medium in terms of response but eliminating the boost pressure issues i might have with this bad flowing Avo housing that i have plus make more power than it??

Appreciate some opinions :thumbsup:

you need to measure your turbine wheel to see if it has a 60mm turbine or a smaller cropped turbine. if its 60mm then go to mtq and buy a .82 garrett housing to suit a gt30 and sell/return your current housing.

with a .82 IW housing i'd expect to see 1bar of boost around 3800-4000rpm on a mild rb25

Yeah that sounds alright id be happy with that thats not too shabby at all from the .82! its stock other than all the usual bolt ons and it will be on E85 too

you need to measure your turbine wheel to see if it has a 60mm turbine or a smaller cropped turbine. if its 60mm then go to mtq and buy a .82 garrett housing to suit a gt30 and sell/return your current housing.

with a .82 IW housing i'd expect to see 1bar of boost around 3800-4000rpm on a mild rb25

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...