Jump to content
SAU Community

Recommended Posts

Hey guys looking at jumping into an Evo 5, have heard quite a lot about themand evos in general being common for rust.

I had a look at one and snapped some pictures of the rust.

I am not that knowledgeable when it comes to rust so any advice would be appreciated.

p10903871.jpg

p10903851.jpg

p10903821.jpg

Thanks

Link to comment
https://www.sau.com.au/forums/topic/375325-advice-rust-is-this-bad/
Share on other sites

depend on the price and how long you want to use the car then the rust is not a big deal :rolleyes:

a lot of old and rusty car has been restore before

Well I must say this is probably the cleanest one I have seen out of 8 cars, it has the least rust but still has rust nonetheless

It would be a keeper if purchased and as for price. What kind of adjustment would you make for something like this. The car is around 18k advertised

take off 2k. pay panel shop 500 to fix the rust. done.

If you take it for a drive to the panelbeater now, he can probably show you where else it's going to break out.

Do a VIN Fast to see where its likely home was in Japan.

If the car came from a winter snowbound area, the future rust is likely to be under the car especially in line with the wheels. If it's from a coastal area, surface rust can be anywhere on the car with deep-seated rust coming through too. Ask the panelbeater for use of his paint thickness gauge. You can only measure on metal areas. On top of the body it should show above 90 microns. Undercarriage; if it's below 50 microns, it'll explain why Evos or all Lancers might be prone to some surface rust. Anyway, have you tapped away with the screwdriver yet?

As you said its the best of many you have looked at, you arent buying a new car. Wire brush, rust convertor, then get a spray can of fish oil and give it a going over. Its a $65,000 car for $18,000. Otherwise dont get a mitsubishi, they are renown for this problem from this era.

Mate I look at Evos for a living every day, and I can tell you now, if that hasn't been sprayed over at some stage before (which it doesn't look like from the pics), that's one of the tidiest you'll ever see. I've seen far far worse on an Evo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...