Jump to content
SAU Community

Recommended Posts

Hi all, sold all my toys and now want to do somthing eles.

Ive had the idea of a 34r for a while (causing me to sell all my bitts) and have now got tge following for the gtr

Hks cams

Os giken cam wheels

Hks type s coilovers

Volk work 19x10.5 +12 ce28n wheels

Apexi weldina cat back

Midori front pipe (with decat)

Apexi power fc with boost cobtroller

Would also do,

Injectors (550cc)

Fuel pump

Thats bout it oerformance wise...

But ive now liked the idea of an audi s3,

Id like to move to melbourne by the end of the year,

How r the police over there?

Both cars will be financed, and both will be about low 50s to get on the road.

Im very sus a 34r will be worth more than low 30s in 4 yrs time. (actual sale price!!)

The audi is good coz its just a step away from the bullshit of cars! And more melbourne!

Ive never driven either but thr dsg box and qauttro sounds very fast!

If i were to go gtr id get a cheap run around too...

Link to comment
https://www.sau.com.au/forums/topic/375505-r34-gtr-or-audi-s3/
Share on other sites

S3 can be quick, but come on is it really on par with a GTR :P

The only real benefit I can see is less attention from the police and perhaps insurance, but if you're going to get a bunky for daily use then no problems there.

the gtr is nice and sexy and will be a head turner, but remember maintenance will be more than the s3, also the s3 will be cheaper to insure in most places. s3 is more comfy, nicer ride, better handling, better fuel consumption. performance wise it ist that much slower than a gtr, 0.5 seconds to 100 isnt noticeable.

also the s3 is vastly different to a golf, in every aspect, engine, gearbox etc. has heaps of tuning potential but will cost roughly as much to tune as a GTR.

in the end it comes down to personal preference. the s3 can be had in 3 or 5 door. so if you have a family, its much more easier to go audi.

also consider police attention, GTR is pretty bad, while the s3 is seen more as normal car.

but if your going loosely on looks, GTR will win hands down

i iunderstand that, but the gtr is not going to be able to be slapped into a street carpark, left alone, driven, comfortablty easy etc etc... and also vic is very flat unless you go way way out of the city so not alot of driving to be had, where as my adelaide house is litteraly 50m inside the cival side of the hills.

i iunderstand that, but the gtr is not going to be able to be slapped into a street carpark, left alone, driven, comfortablty easy etc etc... and also vic is very flat unless you go way way out of the city so not alot of driving to be had, where as my adelaide house is litteraly 50m inside the cival side of the hills.

Get a silver one then... >_<

oh and don't wash it

Edited by 10 4

I vote for the GT-R (whilst owning a 530i BMW too) and get a $2K Corolla to run up the Kms.

'Tis better to get the wet weather dirt on your daily as well.

Really, it'd be different if you were comparing the GT-R with an RS.

I was tossing up between Evo 8MR/9 or R34 GTR for a while after selling my R32. Did a lot of research online, asked for people's opinions etc.

After ONE drive in both, my mind was made up :)

My advice would be to go out and do some test driving. If you have your finances sorted and are serious about buying one, don't be shy to take them for a drive!

I just bought some Nismo skirts and pods for my new car. Guess which one I chose. action-smiley-069.gif

dsg and quattro does not sound fast it sounds expencive if u buy the audi leave it stock or have deep pockets

wheres you know what the gtr is capable of. Drive both i already know what u will choose once you own a jap car you will never turn to the dark side

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...