Jump to content
SAU Community

Recommended Posts

Item:

- R34 GTT HSD HR Coilovers - $800

No Leaks

No knocks

<10,000km since new

- R200 R34 Turbo Manual LSD Diff - $200

Good condition

Spins two

- R34 Coupe Sunroof - $800

Comes in roof section

Includes all wiring and sunroof switches

- R34 Coupe Doors Complete - $150 Each

Glass

Window motor

Central locking

Wiring loom

Hinges

- R34 Coupe Rear Quater Windows - $150 Each

Glass

Rubbers

In steel panel (cut with plasma)

- R34 Coupe GTT Manual Complete Interior - $Offers

Front Seats (airbags intact)

Rear Seat

Carpet

Front Door Trims

Rear Trims

Parcel Shelf

Roof Lining

Manual Centre Console

Dash (no cracks, airbags intact)

- R34 Front/Rear Control Arms - $60ea or $100/pair

Ball joint and bush in good condition

Comes with nut and split pin

- R34 Castor Rod - $30ea or $50/pair

Bush in good condition

Comes with nuts

- R34 GTT Swaybars (front and rear) - $100ea

Good upgrade for Non turbo S-chassis/R-chassis

- R34 GTT Rear Arms - $30ea or $100/set of 6

Toe, camber, traction

- Front knuckles - $100/pr

Good condition

- Front Reo - $50

Not bent

Cut for FMIC

- Front Fiberglass Widebody Guards - $100/pr

Passenger side mint

Drivers side previous fiberglass repair, refer pic

- R34 GTT Coupe 3" Dump Pipe & Full Exhaust - $300

Mild steel

De-cat

Comes with straight pipe and muffler rear sections (unbolts)

- R34 Carbon Fiber Bonnet BLITS ADR Approved - $50

Shit condition

Perfect for rough track car

- Bonnet Hinges - $50/pair

Good condition

AC Condenser - $50

Excellent condition

Comes with all pipe work

R34 Power Steering Rack - $250

Complete with tie rods and tie rod ends

Rubber boots in good condition

Location:Melbourne, Cheap Freight AUSWIDE with www.e-go.com.au

Item Condition: Was was in good condition inside and out

Reason for Selling: Stripping out entire 34 Coupe

Price and Payment Conditions: Cash

Extra Info: Have plenty more parts available, ask and you shall receive

Pictures:Available

Contact Details:PM

PARTS SOLD:

- Engine/loom/ecu

- Gearbox/clutch/crossmember/tailshaft/etc

- Bare rear cradle

- FMIC

- Alloy Rad

- Complete brakes (disks/calipers/lines)

  • 3 weeks later...
  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...
  • 2 weeks later...

Item:

- R34 GTT HSD HR Coilovers - $800

No Leaks

No knocks

<10,000km since new

- R200 R34 Turbo Manual LSD Diff - $200

Do you still have the bottom plastic diffuser ???

Good condition

Spins two

- R34 Coupe Sunroof - $800

Comes in roof section

Includes all wiring and sunroof switches

- R34 Coupe Doors Complete - $150 Each

Glass

Window motor

Central locking

Wiring loom

Hinges

- R34 Coupe Rear Quater Windows - $150 Each

Glass

Rubbers

In steel panel (cut with plasma)

- R34 Coupe GTT Manual Complete Interior - $Offers

Front Seats (airbags intact)

Rear Seat

Carpet

Front Door Trims

Rear Trims

Parcel Shelf

Roof Lining

Manual Centre Console

Dash (no cracks, airbags intact)

- R34 Front/Rear Control Arms - $60ea or $100/pair

Ball joint and bush in good condition

Comes with nut and split pin

- R34 Castor Rod - $30ea or $50/pair

Bush in good condition

Comes with nuts

- R34 GTT Swaybars (front and rear) - $100ea

Good upgrade for Non turbo S-chassis/R-chassis

- R34 GTT Rear Arms - $30ea or $100/set of 6

Toe, camber, traction

- Front knuckles - $100/pr

Good condition

- Front Reo - $50

Not bent

Cut for FMIC

- Front Fiberglass Widebody Guards - $100/pr

Passenger side mint

Drivers side previous fiberglass repair, refer pic

- R34 GTT Coupe 3" Dump Pipe & Full Exhaust - $300

Mild steel

De-cat

Comes with straight pipe and muffler rear sections (unbolts)

- R34 Carbon Fiber Bonnet BLITS ADR Approved - $50

Shit condition

Perfect for rough track car

- Bonnet Hinges - $50/pair

Good condition

AC Condenser - $50

Excellent condition

Comes with all pipe work

R34 Power Steering Rack - $250

Complete with tie rods and tie rod ends

Rubber boots in good condition

Location:Melbourne, Cheap Freight AUSWIDE with www.e-go.com.au

Item Condition: Was was in good condition inside and out

Reason for Selling: Stripping out entire 34 Coupe

Price and Payment Conditions: Cash

Extra Info: Have plenty more parts available, ask and you shall receive

Pictures:Available

Contact Details:PM

PARTS SOLD:

- Engine/loom/ecu

- Gearbox/clutch/crossmember/tailshaft/etc

- Bare rear cradle

- FMIC

- Alloy Rad

- Complete brakes (disks/calipers/lines)

is the car complianced and is it a stat write off

and how much for bare shell plus whatever is left over yuou can't sell. prefer to get with sun roof as this would be a c*nt to get

in melb

  • 2 weeks later...

Do you have the little white plastic lid off the fuel tank? The one with the hoses and fuel pump wires going through it? If so please PM me a price. I am OS at the moment so it might be a little while before I reply.

Ta

Justin

did you have fiberglass front fenders still ?photos ?

floor mats ?

drivers side a pillar trim without broken pins or holes?

little triangles near a pillars on doors to hide screws on mirrors ?

drivers side seat belt if its not frayed

both sides seat belt , push button click in parts on the seat frames ?

door panels ? front and rear sides ? with trims/plastic handles. and the trim around switches ?

window switches ?

the little trim around the sunroof switch on the roof in front ?

rubber between the mirror and the windscreen to stop vibrations ?

drivers side reverese lens if its in good nick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...