Jump to content
SAU Community

Recommended Posts

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

JSAI is not bad at all. My Ztune kit is from them, i had it painted, and i fitted it on my own in my garage in one night. He delivered it fast, price is good, and the fitment is great with all nuts, washers, etc supplied.

You can also try Empire Aero who is a sponsor on here.

The FRP kits are decent quality and very well priced, pics of the kit on my car if you like?

i dont know why you guys bother fitting non genuine parts to your cars

you can so tell the difference when fitted

That's rich coming from someone who has a vested interest in selling overpriced parts from Japan :rolleyes:

The simple fact that is that any mods you make on your car you will never get back in $$ value. You could easily blow 100k modding a 34 GTR with brand name bits, sure i agree the quality is much better, but you need to make a compromise somewhere on a 10 year old car. When you come to sell a 34 that owes you 150k, you put it up for 70k and dudes come round saying "too expensive braaa, there's cheaper ones on carsalez, i'll give you 45k cuz-e"

i dont know why you guys bother fitting non genuine parts to your cars

you can so tell the difference when fitted

Full genuine kit: ~$15,000 shipped.

Decent fiberglass copy: ~$2000 shipped.

For wheels, engine mods etc. I totally agree. But when we're talking $10,000+ difference in price.. for a difference in finish only someone who looked very closely at the car can notice.. and even then might not even be able to.. blink.gif

just got my jsai ztune kit fitted

the sides and rear skirts are not bad

the front bar os f*kin terrible seriously how can you produce a mould with gaps like that

my panel beater needs another day of bracing, bolting and moving around of my factory supports to help it sit flush

there is jel coat cracks in the fibreglass aswell

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...