Jump to content
SAU Community

Recommended Posts

Hi all, just wanna make a quick question about the factoy bose unit on the 2003 V35, is it common for the 6 discs cd stacker to break or jam?? and is it a easy fix?? I have done abit of research and found some horrible stories, that a faulty cd stacker could lead to A/C malfunctions and battery drains and other disastrous scenarios...I would like to know if these are just some extreme cases or a common issue which most owners experience, only reason asking is bcuz I have looked into buying a 03 model v35 skyline and the cd stacker happened to be apparently "jammed" with error code F0 or soemthing...dont really mind if its an easy fix but if it is a quite seriouse issue then i might have to reconsider...

owners comments and experiences would be greatly appreciated

thanks all

Link to comment
https://www.sau.com.au/forums/topic/376211-cd-stacker-issue-v35/
Share on other sites

VERY common. I get a call a week asking for a way to fix them. parts are not available for them due to age and the best solution is to rip the lot and sart fresh.

happy to elaborate on it if you wish.

so i guess double din unit and the facia kit is the way to go, just wondering does the factory pop up screen still work after the conversion? or does it become completely useless?

I went with a CarPC, and left the dead CD staker where it was. I can also switch over to the inbuilt nissan computer for fuel economy and service intervals etc

And if you get the correct cable from Chris ^^^, you can plug whatever device you like into the factory tv :)

I have my CarPC plugged into this screen using a cable from Chris, and also a reverse camera which switches over automatically when you put it in reverse.

So the factory screen is very useful. My center console looks completely stock, and it all tucks away as original.

BFH! (Big Fkn Hammer.)

seriously it is full strip down of the thing and at the end of it the unit is a throw away. this depends WHERE the transport has locked up. some are easy to strip others you will destroy pulling them apart.

time to bend over and take it like a man :P

its a new panel,ac controls, bose lead and SWC unit then a new radio then its fixed. its not going to be a cheap exercise.

There is a how to on the removal of the CD's on youtube

Chris - With the cartridge removed as in the video, will the radio, tape, AC etc still function or is there a self check it does that will make it spit the dummy?

I'm going to have to decide whether to add Ipod interface or do the financially painful change to a double din setup. Not looking forward to it.

it will run without it BUT the ipod lead that I sell will not work as it disables the port that it plugs into if you remove it. there is a trick to it but it is at board level and I do not wish to disclose that for the express reason people will start harassing me when they destroy a board whilst trying to mod it.

Mark, buy this

http://cgi.ebay.com/...=item3cbbeb0f3c or a new one = $300 shipped these days

and this

http://www.skylinesa...04#entry5994404 ---> similar to what I have and is AWESOME!

= profit!!!

Looks good. Is that a Metra Kit or Original?

How well does the colour matching with the G35 kits go with the V35 interiors especially on a 2001 300GT?

Edited by o2bfit

That is a 2nd hand original kit. DON'T EVER CONSIDER USING THE METRA. It is a pos. You can spot the Metra rubber buttons a mile off - they are crap and apparently the climate units are know for failing.

Colour match is perfect on mine.

Question regarding the interior colour. The interior of the my 2001 300GT console is a dull khaki dark greyish colour which I assume is Willow (its certainly no silver or black). There appears to be differences in the jdm colour advertised on ebay, some mention it is a silver/willow, some willow has dark grey on the vents.

This is the closest I've found to my interior but the seller won't ship to NZ.

post-74494-0-54973600-1316252005_thumb.jpg

Does anyone have any information about the interior colours available for the V35 and G35?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...