Jump to content
SAU Community

Recommended Posts

Hi

Im no expert on boost but as far as i know if u have a turbo car, any turbo car, and u want to add boost ( which is fine within limits) shouldnt there be a few other things to do first?

My mate just bought a stock Ford XR6 Turbo... :( not my choice but all good) So the first mod he has done today is add boost......

Shouldnt he add an upgraded intercooler first ? as the turbo will now run harder with boost, he should replace the factory fitted cooler to a larger after market one? and shouldnt he add an upgraded exhaust to cope with extra backpressure, and mebbie even wastegate?

Im not sure how much boost he will run, but i can see a disaster heading his way without other mods to cope. I argued he should do the other mods FIRST to which he says nah all good, so i advised him to run under 10PSI if he isnt doing any other mods.

Any advice is appeciated, thanx u.

Edited by nathanau

Xr6 boost is controlled by the ecu. Im curious to see what happens.

Best to just get a tune.

Hmmms well im curious to see what happens too lolz i can just sense something melting or blowing up..... My mate has Zero knowledge about cars other than to change gears etc.... He wouldnt even know how to operate boost or what PSI is..... he said one of his mates is installing the boost .. some guy who just runs rats on the road...

My mate is into his xr6 turbo first thing first is get intercooler piping done. The stock plasticpiping is designed to burst at anything over stock then tell him to get a flash tune. Stock intercooler is fine for up to 400rwkw

a better cooler and exhaust would have given him more power on the stock boost than turning the boost up a few psi with nothing else done to the car.

Hi dude, yer that sounds like a plan. But he is just running after market boost now, and im guessing its going to be 10 ( knowing his mate) or over 10psi..., without any other mod... and no tune, nothing else.

Edited by nathanau

It will have a fit and the car with do stupid shit. The xr6t is unable to have things like this done because the ECU protects everything.

In other words, only way to raise boost is with an edit.

Looks like he's going to learn the hard way. Tell him to put a big vent to atmosphere bov on there too.

Do not boost using a boost controller will cause problems like leaning out which can cause his motor to blow

heya , yer thats kinda what i figured, i already told him to expect this, but i also wasnt 100% sure, but its gotta be logical, for every extra bit of output you add, there has to be an upgrade to cope. Ill find out tomoz how it all went, i know they did the work this afternoon.... I wonder how then they got around the ECU....

It will have a fit and the car with do stupid shit. The xr6t is unable to have things like this done because the ECU protects everything.

In other words, only way to raise boost is with an edit.

Looks like he's going to learn the hard way. Tell him to put a big vent to atmosphere bov on there too.

I told him to add that but he was like " nah i dont need that" lolzzz i was like Grrrrr! But im not an expert so i figured id ask more knowledgeable ppls here :)

You can't get around ecu tried it on mates xr6 tell him best bet is go see a tuner that deals with xr6t's my mate got a stage 1 kit done for 2k including tuning which was bigger injectors metal piping and flash tune gained him 80rwkw

My mate is into his xr6 turbo first thing first is get intercooler piping done. The stock plasticpiping is designed to burst at anything over stock then tell him to get a flash tune. Stock intercooler is fine for up to 400rwkw

Thanx dude, shall be passing all these comments onto him. I told him to at least join some forums first and as some questions and read. but nope I cant tell him .

anyone know where i can buy more boost so i can install some on my car? cant seam to find it on just jap....

Yawns.... more for his benefit than mine... but i did make a post re Turbo Timers not been safe for car theft... u can comment on that :)

http://www.skylinesaustralia.com/forums/topic/376892-trubo-timers-not-safe-for-theft-of-car/

Edited by nathanau

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...