Jump to content
SAU Community

Recommended Posts

Hey guys,

So basically after scrolling through the parts classifieds and not finding what i want..... browsing yahoo Japan and becoming a woman with PMS not getting her way, I want to know if anybody knows of any local Wrecks?

Basically I want a few parts for the interior of my car, that short of searching for on yahoo Japan, i currently don't have many other avenues. Actually, reword that...I want to change the entire interior of my car. I want to change all the dash components, door trims and pillar trims from the baby poo(beige) to black.

I will paint the Pillar trims, and have carpets re trimmed, so really just needing dash and centre console. What are my best bets?

Cheers

Scott

Link to comment
https://www.sau.com.au/forums/topic/377045-local-m35-wrecks/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

I have seen a couple of full cars around that were destined to be wrecked/parted out - Im pretty sure they wanted to do halfcuts with the engine before stripping the cars though.

Id have a look for sellers on Ebay that have random interior components, and then touch base with them to see if they have the rest of the car to part out.

Haha thanks for that, But I will be getting my current seats re-trimmed in a leather so no need to worry. That was my other option, touching base with those that have a few parts advertised.

Feel free to advise of any that come up in this topic. Cheers lads.

if anybody does find a wreck let me know. ill be keen on the Motor..

guy that bought my stagea has already blown it up lol

If you want a halfcut, Nisswreck has been wanting to offload one for ages! Should make interior parts avaliable too! I know they can be a pain to deal with though :/

and WTF did he do!

hes a limiter junky.

he wouldve sat on the limiter, and im pretty sure our limiters are fuel cuts.

rich lean rich lean rich lean BANG.

los compression to both centre cylinders on each chamber.

If nisswreck have a half cut ill give them a call.

hes a limiter junky.

he wouldve sat on the limiter, and im pretty sure our limiters are fuel cuts.

rich lean rich lean rich lean BANG.

los compression to both centre cylinders on each chamber.

If nisswreck have a half cut ill give them a call.

http://www.nissansilvia.com/forums/index.php?showtopic=498369

They should have at least 1, possibly 2. Let us know how you go, I wanted a couple of random interior panels from them months ago but they didnt want to strip the interior as they were still driving the thing around for deliveries :rolleyes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...