Jump to content
SAU Community

Recommended Posts

what the f**k did i just watch?

A bunch of f**king retards trying to arrest someone.

those cops are seriously retarded. even after all the stupid stop sticks and barriers and then a van and a bus he still nearly got away. they put the bus in front of him but the van was meters behind giving him a good run up which put his life and theirs in danger and if he'd been able to see which way to turn chances are he would ahve gotten out without a good launch in the right direction.

instead of fking about with all that crap all they had to do was put the van right on the rear bumper and the bus right on the front bumper then kick in the window and haul him out. but no, they'd much rather call in 20 cops, 5 vehicles and spend an hour or two pissing about.

I did like that typical japanese he's braking the law but still put his left indicator on to exit the curb... lol.

"

Mate dont know where you've been driving in Japan but I can tell you from vast experience Japanese rarely use their "winka" let alone watch the road or use their mirrors.

Its usually a great day of celebration when you get a Japanese driver signal where he/she intends to turn.

The one button they know how to operate extremely well is the Hazard light.

Personally I reckon old mate hit the indicator by accident in his panic to escape the keystones.

And this is classic example of the Japanese keystones at their finest.

I've seen so many classic examples of situations like this...you should see the fire brigade, way worse !!

Common sense would have seen them draw their guns which the cops all carry and shoot the bugger for committing vandalism on a GTR but no, the tv cameras are trained on them so its let should the nation how stupid we really are. The common man thinks that wow the cops are amazing.

On the other hand this is why the yaks are still laughing all the way to the bank.

what the f**k did i just watch?

Its a Japanese cop show and you watched Japanese finest at their absolute idiotic best.

ahhh shit not heard that one, used to love reading true crime novels about those guys, they really are a one of a kind criminal phenomenom. Basically the reason Japan got into WW2 if you believe some of the books, even more hilarious are the full on right wing black coats who rant about foreigners. Had one jostle me on a platform in Tokyo once, I was pretty drunk but resisted pounding him into seven shades of blue and just took off laughing.

always the best way to end a fight i find..

I found one of these sort of shows not long ago. but these were at the JZX100's

Its in 3 parts, they also use V35 sedans aswell.

http://www.youtube.com/watch?v=92AN9gLvrho

Aww i wish there was some kind of instant babel fish subtitle thingy, i am understanding every other word and its really frustrating not getting the whole story.

It essentially just 'thats a bad guy' ...."hmmm lets not let him spot us aye"....."oh no he spotted us and is running, lets chase him"

am i rite?

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...